Abstract:Three-dimensional (3D) integration technology using Cu interconnections has emerged as a promising solution to improve the performance of silicon microelectronic devices. However, Cu diffuses into SiO2 and requires a barrier layer such as Ta to ensure acceptable reliability. In this paper, the effects of temperature and strain normal to the interface on the inter-diffusion of Cu and Ta at annealing conditions are investigated using a molecular dynamics (MD) technique with embedded atomic method (EAM) potentials. Under thermal annealing conditions without strain, it is found that a Cu-rich diffusion region approximately 2 nm thick is formed at 1000 K after 10 ns of annealing. Ta is capable of diffusing into the interior of Cu but Cu hardly diffuses into the inner lattice of Ta. At the Cu side near the interface an amorphous structure is formed due to the process of diffusion. The diffusion activation energy of Cu and Ta are found to be 0.9769 and 0.586 eV, respectively. However, when a strain is applied, a large number of crystal defects are generated in the sample. As the strain is increased, extrinsic stacking faults (ESFs) and lots of Shockley partial dislocations appear. The density of the dislocations and the diffusion channels increase, promoting the diffusion of Cu atoms into the inner lattice of Ta. The thickness of the diffusion layer increases to 4 times the value when only a temperature load of 700 K is applied. The MD simulations demonstrated that Ta is very effective as a barrier layer under thermal loading only, and its effectiveness is impaired by tensile strain at the Cu/Ta interface. The simulations also clarified the mechanism that caused the impairment. The methodology and approach described in this paper can be followed further to study the effectiveness of barrier layers under various annealing and strain conditions, and to determine the minimum thickness of barrier layers required for a particular application.

Barrier layer and annealing temperature dependent microstructure evolution of nanocrystalline Cu films

Diffusion Barrier Properties Of Amorphous And Nanocrystalline Ta Films For Cu Interconnects

Effect of Annealing Temperature and CuO on Microstructure and Optical Band Gap of CuxZn1−xO Thin Films

Annealing Improved Ductility and Fracture Toughness of Nanocrystalline Cu Films on Flexible Substrates

Eff ects of Diff erent Mechanical Alloying Parameters on Microstructure of High Temperature Nanocrystalline Cu-Ta Alloys

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Influence of thermal annealing on the microstructure evolution, fracture and fatigue behavior of nanocrystalline Cu films

Investigation of microstructure thermal evolution in nanocrystalline Cu

Atomic assembly of Cu/Ta multilayers: Surface roughness, grain structure, misfit dislocations, and amorphization

Coupling Effect of the Electric and Temperature Fields on the Growth of Nanocrystalline Copper Films

Effects of Electric Field Annealing on the Interface Diffusion of Cu/Ta/Si Stacks

Kinetic study of grain growth in highly (111)-preferred nanotwinned copper films

High-Temperature Ta Diffusion in the Grain Boundary of Thin Cu Films

Morphology and microstructure control of sputter-deposited copper films by addition of Cr

Diffusion Barrier Properties of Ta Films Deposited with Different Rates

Thermal stability of Ta-Si-N/Zr barrier in Cu metallization

Effect of processing conditions on microstructure and electrical characteristics of Ni thin films

Diffusion behavior of Cu/Ta heterogeneous interface under high temperature and high strain: An atomistic investigation

Effect of grain boundary deformation on mechanical properties in nanocrystalline Cu film investigated by using phase field and molecular dynamics simulation methods

Effects of Periods on the Evolution of Microstructure and Mechanical Properties of Multilayered Cu-W Films During Thermal Annealing

Length Scale Effect on the Thermal Stability of Nanoscale Cu/Ag Multilayers