Abstract:A unified-mode analysis method for modeling symmetric networks is proposed in this paper. Adjusting to the characteristics of Marchand balun circuits, a unified-mode circuit model is constructed by introducing virtual impedance. The tenable condition of a Marchand balun with connecting segments is then derived. The parameter constraint of Marchand balun's input matching is given in a quarter-saddle diagram. Simulated results under different parameter conditions verify the validity of the derived formulas. Based on the derived formulas, the traditional isolation circuit and impedance matching circuit are merged with a Marchand balun to achieve matching for all ports and full-frequency isolation between output ports. A microstrip balun with input and output impedance values of 50 Ω, operating at 1.5 GHz, is simulated, fabricated, and measured. The simulated and measured results of the microstrip balun are in good agreement. When the core parameters remain unchanged, an impedance transformer is inserted in front of the input port of the balun to realize a balun with a topology characterized by flexible impedance transformation. A balun with an input impedance of 35 Ω and different output impedances of 50 Ω and 75 Ω is simulated and fabricated to verify the design concept. Measured results show that an amplitude balance of less than 0.4 dB and a phase balance of less than 3° for a fractional bandwidth of 50%. It should be mentioned that all design equations are closed-form and can be readily employed to design symmetric networks.

Four-element LC-baluns for power matching arbitrary impedances

Compact CMOS Baluns for the 4–10 GHz Band Applications

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

Design of Millimeter-Wave Transformer Balun with Isolation Circuit in Silicon Based Technology

A Novel Compact Dual-Band Antenna Array With High Isolations Realized Using the Neutralization Technique

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of a Substrate Integrated Waveguide Balun Filter Based on Three-Port Coupled-Resonator Circuit Model

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

A Unified-Mode Analysis Method for Symmetric Networks and Its Application to Balun Design

Planar Compact Dual-Band Balun with Flexible Frequency Ratios

An Advanced Broadband Absorptive Balun for Modern Communication Systems

Low-loss Balun Design and Compact Modeling for RF/millimeter-wave Circuit Application

A 0.13-Mu M Cmos 0.1-12 Ghz Active Balun-Lna For Multi-Standard Applications

Modified Broadband Ruthroff-Type Transmission Line Transformer Balun for Isolation-Enhanced Passive Mixer Design

A Lumped-Element Directional Coupler for Bandwidth Enhancement, Impedance Matching, and Harmonic Suppressions

A 4.7-to-18-ghz Ultra-Wideband Variable-Gain Balun-LNA Using 3 Rd -Order-band-pass Input Matching in 40-Nm CMOS.

A 0.13-μm CMOS 0.8–10.6GHz low noise amplifier with active balun for multi-standard applications

A Broadband Balun With Tunable Phase-Shifting Function for Low-Cost Phased Array

0.2–4.35 GHz Highly Linear CMOS Balun-Lna with Substrate Noise Optimization

Analysis and Design of Broadband Balance-Compensated Transformer Baluns for Silicon-Based Millimeter-Wave Circuits

Synthesis and Design of LTCC Filtering Balun With Wide Stopband