Abstract:A unified-mode analysis method for modeling symmetric networks is proposed in this paper. Adjusting to the characteristics of Marchand balun circuits, a unified-mode circuit model is constructed by introducing virtual impedance. The tenable condition of a Marchand balun with connecting segments is then derived. The parameter constraint of Marchand balun's input matching is given in a quarter-saddle diagram. Simulated results under different parameter conditions verify the validity of the derived formulas. Based on the derived formulas, the traditional isolation circuit and impedance matching circuit are merged with a Marchand balun to achieve matching for all ports and full-frequency isolation between output ports. A microstrip balun with input and output impedance values of 50 Ω, operating at 1.5 GHz, is simulated, fabricated, and measured. The simulated and measured results of the microstrip balun are in good agreement. When the core parameters remain unchanged, an impedance transformer is inserted in front of the input port of the balun to realize a balun with a topology characterized by flexible impedance transformation. A balun with an input impedance of 35 Ω and different output impedances of 50 Ω and 75 Ω is simulated and fabricated to verify the design concept. Measured results show that an amplitude balance of less than 0.4 dB and a phase balance of less than 3° for a fractional bandwidth of 50%. It should be mentioned that all design equations are closed-form and can be readily employed to design symmetric networks.

Low-loss Balun Design and Compact Modeling for RF/millimeter-wave Circuit Application

Compact CMOS Baluns for the 4–10 GHz Band Applications

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

Design of Millimeter-Wave Transformer Balun with Isolation Circuit in Silicon Based Technology

An Advanced Broadband Absorptive Balun for Modern Communication Systems

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Design of a Substrate Integrated Waveguide Balun Filter Based on Three-Port Coupled-Resonator Circuit Model

Broadband Compact Model for On-Chip Mm-Wave Transformers and Baluns with Emphasis on Capacitive Coupling Effects

Planar Compact Dual-Band Balun with Flexible Frequency Ratios

800Mhz~2.5ghz Miniaturized Multi-layer Symmetrical Stacked Baluns for Silicon Based RF ICs

Transformer-Based Low Voltage Design of 17 GHz Mixers with On-chip Balun Using 0.13-¿M Standard CMOS Process

A Broadband Monolithic Balun Based on 0.13μ CMOS m Process Using Planar-Spiral Transformers

An Ultra Wideband Antenna Based on Tightly Coupled Effect with Practical Compact Balun

A Unified-Mode Analysis Method for Symmetric Networks and Its Application to Balun Design

A Broadband Monolithic Balun Based on 0.13/spl mu/m CMOS Process Using Planar-Spiral Transformers

An Area-Saving Balun for Multiband IoT Transmitter

Analysis and Design of Broadband Balance-Compensated Transformer Baluns for Silicon-Based Millimeter-Wave Circuits

Design of Monolithic Broadband Balun Based on Planar-Spiral Inductors

Design Of A Miniaturized Low-Profile Archimedean Spiral Antenna With Tapered Balun Transformer

Synthesis and Design of LTCC Filtering Balun With Wide Stopband

The Design of a New Spiral Inductor Balun Used in RF/MW Based on 0.13&#x03bc;m CMOS Process