Abstract:This article reports a high-gain wideband low-noise amplifier (LNA) with single ended input and differential output for multi-standard wireless receiver operating in 0.2 to 7 GHz. The proposed balun-LNA is cascode structure with common-gate–common-source (CG–CS) balun load to achieve single to differential conversion. Focusing on improving the voltage gain, bandwidth and noise performance at the same time, several techniques are implemented in this balun-LNA. A current source is added shunting CG stage to relieve voltage headroom and improve gain and linearity. Wideband input matching is achieved by active shunt-shunt resistive feedback, together with the input series inductor. Moreover, feedforward and current-reuse technique are introduced to further optimize the noise performance. The proposed LNA has a measured voltage gain of 26 dB which is nearly 6 dB higher than other balun-LNA with same supply and process. Moreover, the minimum noise figure (NF) is 2.0 dB owing to multiple noise-optimized technique. The achieved input power at 1 dB gain compression point (IP1 dB) is −14 dB m at 1 GHz and input return loss ( S11 ) is better than −10 dB across entire operating frequency range. IIP3 and IIP2 achieve −7 dBm and 25 dBm respectively, measured at 1 GHz. The power consumption is 15.5 mW at 1.2 V supply. The LNA is fabricated in 130 nm CMOS process and the active area is 0.097 mm2 . The LNA achieves high voltage gain and wide operating frequency range with low NF, which can be reflected from the figure of merit (FOM) of 23.1.

0.2–4.35 GHz Highly Linear CMOS Balun-Lna with Substrate Noise Optimization

A high-gain wideband balun-LNA with multiple noise-optimized technique

Compact CMOS Baluns for the 4–10 GHz Band Applications

A 0.13-μm CMOS 0.8–10.6GHz low noise amplifier with active balun for multi-standard applications

A 0.061-Mm² 1–11-Ghz Noise-Canceling Low-Noise Amplifier Employing Active Feedforward with Simultaneous Current and Noise Reduction

A Highly Linear 2.4GHz Low Noise Amplifier

A 0.13-Mu M Cmos 0.1-12 Ghz Active Balun-Lna For Multi-Standard Applications

A 6.512-GHz Balanced Variable-Gain Low-Noise Amplifier With Frequency-Selective Gain Equalization Technique

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

A Gm-boosted and current peaking wideband merged LNA and mixer

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

A CMOS Wide-Band Low-Noise Amplifier with Balun-Based Noise-Canceling Technique

A 28 GHz balun‐first LNA with db‐linear 32 db gain range for 5 G applications

A 4.7-to-18-ghz Ultra-Wideband Variable-Gain Balun-LNA Using 3 Rd -Order-band-pass Input Matching in 40-Nm CMOS.

Inductor-less PVT robust gain switching balun LNA for multistandard applications

A high linearity UWB LNA using a novel linearizer feedback, based on complementary derivation superposition techniques

A High Gain and High Linearity Current‐reused CMOS LNA Using Modified Derivative Superposition Technique with Bulk‐bias Control

A 26–31 GHz Linearized Wideband CMOS LNA Using Post-Distortion Technique

A 5 Ghz 7.2 Db Nf Low Power Direct Conversion Receiver Front-End with Balun Lna

A 23-30 GHz LNA with Noise-Cancelling in 28nm CMOS