A Lumped-Element Directional Coupler for Bandwidth Enhancement, Impedance Matching, and Harmonic Suppressions

Murong Zhuo

DOI: https://doi.org/10.1155/2024/6662753

IF: 1.987

2024-02-22

International Journal of RF and Microwave Computer-Aided Engineering

Abstract:This paper presents a lumped-element wideband directional coupler that enables arbitrary impedance matching and harmonic suppressions from 2 f 0 . The coupler consists of four filtering networks (FNs) and an asymmetric branch-line hybrid serving as the matching network. The use of lumped-element topology helps reduce circuit size and improve harmonic suppressions. Each FN, composed of two lumped-element resonators, contributes two additional transmission poles, enabling bandwidth scaling, bandwidth enhancement, and harmonic suppressions. To demonstrate the effectiveness of the proposed design, a wideband coupler with various terminal impedances operating at 0.5 GHz is designed, simulated, and fabricated. The measured size is 0.039 × 0.039 λ g 2 , the fractional bandwidth for –14.3 dB return loss is 46%, and the harmonic suppression is more than –30 dB from 0.69 to 4.5 GHz.

engineering, electrical & electronic,computer science, interdisciplinary applications

What problem does this paper attempt to address?

The paper aims to address some key issues present in traditional branch line couplers in wireless communication systems, including:

1. **Large circuit size**: Traditional branch line couplers consist of four 90° transmission line segments, resulting in a large circuit footprint.
2. **High-order harmonic interference**: High-order harmonics may interfere with other devices, requiring additional low-pass filters to eliminate these unwanted harmonics.
3. **Limited bandwidth**: Existing solutions (such as combinations of transmission lines and inductors, parallel short-circuit and open-circuit stubs, etc.) have made some improvements but still suffer from narrow bandwidth issues, limiting practical applications.

To address these problems, this paper proposes a novel lumped-element broadband directional coupler with the following features:
- **Arbitrary impedance matching**: Capable of achieving arbitrary port impedance matching.
- **Broadband characteristics**: Achieves broadband matching through four filter networks (FNs) and an asymmetric branch line hybrid.
- **Harmonic suppression**: Provides broadband harmonic suppression starting from 2 times the fundamental frequency.
- **Miniaturization**: Utilizes a lumped-element topology, helping to reduce circuit size and improve harmonic suppression.

Experimental validation shows that the design achieves a relative bandwidth of 46% at an operating frequency of 0.5 GHz and provides harmonic suppression of more than -30 dB in the range of 0.69 GHz to 4.5 GHz. Additionally, the coupler is significantly smaller in electrical size compared to other similar designs, offering high practical value.