Abstract:Features peculiar to the synthesis of SiC–Si 3 N 4 –Si 2 N 2 O composite powder with a controlled content of silicon carbide, nitride, and oxynitride phases, as well as the structure and properties of hot-pressed ceramics produced from this powder, were examined. The optimal composition of the synthesized SiC–Si 3 N 4 –Si 2 N 2 O powder was achieved by heating a 1 : 3 mixture of thermally expanded graphite (TEG) and silicon up to 1200°C in air. The interaction of TEG with fine silicon at 1200°C led to the formation of a solid solution of carbon in silicon carbide, accompanied by heat release. The generated heat increased temperature within localized volumes of the TEG cellular structure to a level where air nitrogen facilitated the development of silicon nitride and oxynitride and an amorphous phase. The amorphous phase crystallized as the interaction time increased to 2.5 h. The duration of the process influenced the final distribution of the phases, formed with the participation of CO, SiO, and air nitrogen. The microstructure of the synthesized powder was characterized by a general agglomerated state, resulting from rod and plate forms of Si 3 N 4 and Si 2 N 2 O. Hot pressing of the synthesized SiC–Si 3 N 4 –Si 2 N 2 O composite powder with Al 2 O 3 and Y 2 O 3 activators yielded superfine ceramics, possessing enhanced hardness and fracture toughness (HV10 = 20.7 GPa and K Ic = 6.5 MPa · m 1/2 ). The structure of the ceramics sintered at 2000°C differed from those sintered at 1850°C, primarily by higher density and average grain size. The superfine state significantly influenced the abrasive wear resistance of the ceramics in dry friction conditions. The linear wear index of a sample with an average size of structural elements varying from 0.2 to 1.5 μm was 111 μm/km at a sliding speed of 1 m/sec under a load of 0.2 MPa. This was significantly lower than the linear wear index of industrial ceramics of reaction-sintered silicon carbide (RSSC), which was 232.4 μm/km.

High‐strength Si–SiC lattices prepared by powder bed fusion, infiltration‐pyrolysis, and reactive silicon infiltration

Preparation of low residual silicon content Si-SiC ceramics by binder jetting additive manufacturing and liquid silicon infiltration

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Complex SiC-based structures with high specific strength fabricated by vat photopolymerization and one-step pyrolysis

Advanced hierarchical biomorphous silicon carbide monoliths

Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting

Additive Manufacturing of C/C-SiC Ceramic Matrix Composites by Automated Fiber Placement of Continuous Fiber Tow in Polymer with Pyrolysis and Reactive Silicon Melt Infiltration

Rapid Manufacture of High Relative-density and Complex Structure Components of Silicon Carbide by RMI-PIP Process

Porous 2h‐silicon Carbide Ceramics Fabricated by Carbothermal Reaction Between Silicon Nitride and Carbon

High-strength and low-silicon SiC ceramics prepared by extrusion molding 3D printing

Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics

Gel casting and properties of porous silicon carbide/silicon nitride composite ceramics

Densification and Enhancement of Sic Particulate Reinforced Fine Grain Sic Ceramic

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

A new approach for the net-shape fabrication of porous Si3N4 bonded SiC ceramics with high strength

Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosity and High Strength

Gel Reactive Melt Infiltration: A New Method for Large-Sized Complex-Shaped C/C Components Ceramic Modification

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Synthesis and properties of porous SiN/SiC nanocomposites by carbothermal reaction between SiN and carbon

Synthesis and Consolidation of Composite Materials in the SiC–Si3N4–Si2N2O System

3D printing of high‐purity silicon carbide