Abstract:In this study, we propose, fabricate, and examine the electrical characteristics of high-performance channel-engineered amorphous aluminum-doped zinc tin oxide (a-AZTO) thin-film transistors (TFTs). Amorphous indium gallium zinc oxide (a-IGZO) film with improved conductivity (obtained via rapid thermal annealing in vacuum) is applied as the local conductive buried layer (LCBL) of the channel-engineered a-AZTO TFTs. The optical transmittance of the a-IGZO and a-AZTO films in the visible region is >85%. The a-IGZO LCBL reduces the resistance of the a-AZTO channel, thereby resulting in increased drain current and improved device performance. We find that our fabricated channel-engineered a-AZTO TFTs with LCBLs are superior to non-channel-engineered a-AZTO TFTs without LCBLs in terms of electrical properties such as the threshold voltage, mobility, subthreshold swing, and on-off current ratios. In particular, as the a-IGZO LCBL length at the bottom of the channel increases, the channel resistance gradually decreases, eventually resulting in a mobility of 22.8 cm²/V · s, subthreshold swing of 470 mV/dec, and on-off current ratio of 3.98×107. We also investigate the effect of the a-IGZO LCBL on the operational reliability of a-AZTO TFTs by measuring the variation in the threshold voltage for positive gate bias temperature stress (PBTS), negative gate bias temperature stress (NBTS), and negative gate bias temperature illumination stress (NBTIS). The results indicate that the TFT instability for temperature and light is not affected by the LCBL. Therefore, our proposed channel-engineered a-AZTO TFT can form a promising high-performance high-reliability switching device for next-generation displays.

Improving Performance of Tin-Doped-Zinc-Oxide Thin-Film Transistors by Optimized Multi-Stacked Active-Layer Structures

Improving Performance of Tin-Doped-Zinc-Oxide Thin-Film Transistors by Optimizing Channel Structure

Performance improvement of tin-doped zinc oxide thin-film transistor by novel channel modulation layer of indium tin oxide/tin zinc oxide

Performance Enhancement of TiZO Thin Film Transistors by Introducing a Thin ITO Interlayer

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

Performance Improvement of Amorphous Thin-Film Transistors with Solution-Processed InZnO/InMgZnO Bilayer Channels

Improving TFT Device Performance by Changing the Thickness of the LZTO/ZTO Dual Active Layer

High-Performance Thin-Film Transistors with ZnO/Al2O3 Superlattice Channel Fabricated by Atomic Layer Deposition

Simultaneous Enhancement of Electrical Performance and Stability of Zinc-Tin-oxide Thin-Film Transistors by Tantalum Doping

High-performance Fully Transparent Al–Sn–Zn–O Thin-Film Transistors Using Double-Channel Structures

High-Performance Al–Sn–Zn–O Thin-Film Transistor with a Quasi-Double-Channel Structure

Performance enhancement of ATZO TFTs by component control and post treatment

Effects of channel structure consisting of ZnO/Al2O3 multilayers on thin-film transistors fabricated by atomic layer deposition

Performance Enhancement of Channel-Engineered Al-Zn-Sn-O Thin-Film Transistors with Highly Conductive In-Ga-Zn-O Buried Layer via Vacuum Rapid Thermal Annealing

Enhanced Performance of ZnO Thin-Film Transistors with ZnO Dual-Active-layer

High-Performance Mo-Zn-O Oxide Transistors with Double Channels

Fully transparent high performance thin film transistors with bilayer ITO/Al-Sn-Zn-O channel structures fabricated on glass substrate

Achieving High Performance of ZnSnO Thin-Film Transistor via Homojunction Strategy

High Performance Ti-Doped ZnO TFTs with AZO/TZO Heterojunction S/D Contacts

High-Performance Fully Thermal ALD-Processed IGZO Thin Film Transistors

Titanium doped Zinc-oxide based Thin Film Transistors: Optimization of the source/drain materials