Abstract:It is well established that fatigue crack nucleation and small crack growth in high strength aluminum alloys are highly influenced by the surrounding microstructure including grain boundaries, texture, inclusion barriers, among other factors. As such, specific and targeted experimental and computational methods are necessary to accurately capture and predict the discrete behavior of microstructurally small fatigue cracks. In this study, surface fatigue crack nucleation and microstructurally small crack growth in high strength aluminum alloys, commonly used in aerospace applications, are evaluated through a holistic approach encompassing fatigue testing, crack measurement, and computational prediction of crack growth rates. During fatigue testing, crack shapes and growth are quantified using a novel surface replication technique that is applied to investigate crack nucleation, as well as to collect validation data that includes an accurate description of crack shape during crack propagation, a challenging and essential component in predicting crack growth. Computational simulation of fatigue crack growth in non-straight, complex surface crack arrays typically requires high fidelity analysis using computationally expensive methods to account for the mathematical and geometrical complexities inherent in the solution. A dislocation distribution based technique has been previously demonstrated to rapidly and accurately predict the stress intensity factors for through cracks of complex shape. This method was expanded and investigated as an approach for rapidly predicting the crack growth rate of kinked and tortuous surface crack arrays, using the crack configuration and bulk material properties as inputs. To investigate the accuracy and effectiveness of this characterization approach, surface crack growth in AA7075-T7351 was experimentally analyzed and modeled under high cycle and low cycle fatigue conditions. This comprehensive approach was determined to be an expedient and applicable method for characterizing and evaluating the nucleation and crack growth rate of non-planar microstructurally small and short crack configurations.

Experimental Investigation of Crack Jumps during Initiation and Growth in IN718

Ex-situ observation of the short crack initiation and propagation behaviour of nickel-base wrought alloy Inconel 718 for critical rotating components under fatigue conditions at elevated temperatures

Experimental and Modeling Study on Small Fatigue Crack Initiation and Propagation Behavior of Inconel 617

In-situ SEM-EBSD investigation of the low-cycle fatigue deformation behavior of Inconel 718 at grain-scale

Failure mechanism and life correlation of Inconel 718 in high and very high cycle fatigue regimes

INITIATION AND PROPAGATION BEHAVIOR OF A FATIGUE CRACK OF ALLOY 718

Computational Analysis of Fatigue Crack Propagation at Elevated Temperature for In718

Experimental and Numerical Study of Wrought Inconel 718 Under Thermal Cycles of Variable Amplitude Coupled with Mechanical Loading

Cyclic microstructure analysis, crack propagation and life prediction of Inconel 750H considering the slip fracture energy

Multi-stage dwell fatigue crack growth behaviors in a nickel-based superalloy at elevated temperature

An In Situ Study of Short Crack Initiation and Propagation During Fatigue Testing of a Hot Isostatically Pressed Al-7%Si-0.5%Mg (A357-T6) Alloy Specimen

Characterization of Surface Fatigue Crack Nucleation and Microstructurally Small Crack Growth in High Strength Aluminum Alloys

Fatigue and Fracture Behavior of Nickel-Based Superalloy Inconel 718 Up to the Very High Cycle Regime

A unified material model for multiaxial ductile fracture and extremely low cycle fatigue of Inconel 718

Time‐ and cycle‐dependent growth of surface cracks in alloy 718

Investigation of the fatigue damage mechanism of Inconel 617 at elevated temperatures obtained by in situ SEM fatigue tests

Creep-fatigue damage mechanisms and life prediction based on crystal plasticity combined with grain boundary cavity model in a nickel-based superalloy at 650°C

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

An analysis of fatigue crack features at various crack lengths through mating fracture surface pairs

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

Experimental characterization of flat indentation creep behaviour of Inconel 617