Abstract:Time-dependent plastic deformation, also known as creep, can occur in high-melting-point materials at room temperature when subjected to submicron plastic contact (e.g., components in micro-electronic mechanical systems) due to the extremely high stress conditions. Previous investigations of creep behavior at submicron scale mainly focus on uniform microstructures, whereas recently developed high-performance structural materials usually show complex microstructural heterogeneities. Here, we demonstrate a high-throughput nanoindentation approach to unveil the creep behavior of locally diverse microstructures, via a case study on an interstitial high-entropy alloy (iHEA). The prototype iHEA specimen was firstly pre-strained by severe cold-rolling to achieve diverse microstructure features including dense dislocations, nanotwins and nanograins. Nanoindentation mapping with 144 indents is conducted to collect creep data from all types of diverse microstructures, followed by systematical calculations based on power-law analysis. Then intuitive contour maps of nanohardness (H), strain rate (ε ̇) and stress exponent (n) are attained. The individual creep mechanism of each microstructure variant is evaluated by correlating local microstructure features with corresponding creep responses from these contour maps. With the increase of n value for different sample regions, the ε ̇ value inversely reduces and the corresponding dominant creep mechanism gradually converts from diffusion-mediated mode to dislocation-controlled one. The presence of nanograins and nanotwins significantly hinders dislocation interactions and promotes stress-induced diffusion. This work verifies that nanoindentation creep behavior is highly correlated with local microstructure features, and the mapping approach is feasible for evaluating creep-resistance of locally diverse microstructures under extremely high-stress conditions.

Experimental characterization of flat indentation creep behaviour of Inconel 617

Creep‐fatigue Deformation Characteristics and Life Prediction Model of Inconel 718 Superalloy under Hybrid Stress–strain‐controlled Mode

Mechanisms of deformation, damage and life behavior of inconel 617 alloy during creep-fatigue interaction at 700 °C

Assessment of Creep-rupture Strength for Inconel 617 Alloy

Creep Behavior and Microstructure Evolution of Ni-based Alloy IN617 at 1000 °C

Creep Performance Study of Inconel 740H Weldment Based on Microstructural Deformation Mechanisms

Dynamic recrystallisation in Inconel®718 at creep conditions

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

Nanoindentation creep behavior of diverse microstructures in a pre-strained interstitial high-entropy alloy by high-throughput mapping

Accelerated High-Temperature Creep Failure Induced by Internal Nitridation of In617 Superalloy

Creep Behaviors Evaluation of Incoloy800H by Small Punch Creep Test

Small punch creep test reveals the differences of high-temperature creep behaviours for laser powder bed fusion and Rolled Inconel 718 alloys

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Experimental Study on the Mechanical Strength and Dynamic Strain Aging of Inconel 617 Using Small Punch Test

A Modified Reference Area Method to Estimate Creep Behaviour of Service-Exposed Cr5Mo Based on Spherical Indentation Creep Test

Nanoindentation size effects of mechanical and creep performance in Ni-based superalloy

Experimental and Modeling Study on Small Fatigue Crack Initiation and Propagation Behavior of Inconel 617

Creep-fatigue damage mechanisms and life prediction based on crystal plasticity combined with grain boundary cavity model in a nickel-based superalloy at 650°C

Spherical Indentation Creep Characteristics and Local Deformation Analysis of 310S Stainless Steel

Room temperature nanoindentation creep of nitrocarburised AISI 4140 steel

Cyclic response and residual life prediction of Inconel 718 superalloy after overloading under hybrid stress-strain controlled creep-fatigue loading