Abstract:Time-dependent plastic deformation, also known as creep, can occur in high-melting-point materials at room temperature when subjected to submicron plastic contact (e.g., components in micro-electronic mechanical systems) due to the extremely high stress conditions. Previous investigations of creep behavior at submicron scale mainly focus on uniform microstructures, whereas recently developed high-performance structural materials usually show complex microstructural heterogeneities. Here, we demonstrate a high-throughput nanoindentation approach to unveil the creep behavior of locally diverse microstructures, via a case study on an interstitial high-entropy alloy (iHEA). The prototype iHEA specimen was firstly pre-strained by severe cold-rolling to achieve diverse microstructure features including dense dislocations, nanotwins and nanograins. Nanoindentation mapping with 144 indents is conducted to collect creep data from all types of diverse microstructures, followed by systematical calculations based on power-law analysis. Then intuitive contour maps of nanohardness (H), strain rate (ε ̇) and stress exponent (n) are attained. The individual creep mechanism of each microstructure variant is evaluated by correlating local microstructure features with corresponding creep responses from these contour maps. With the increase of n value for different sample regions, the ε ̇ value inversely reduces and the corresponding dominant creep mechanism gradually converts from diffusion-mediated mode to dislocation-controlled one. The presence of nanograins and nanotwins significantly hinders dislocation interactions and promotes stress-induced diffusion. This work verifies that nanoindentation creep behavior is highly correlated with local microstructure features, and the mapping approach is feasible for evaluating creep-resistance of locally diverse microstructures under extremely high-stress conditions.

Room temperature nanoindentation creep of nitrocarburised AISI 4140 steel

Loading Rate and Holding Load Dependent Room Temperature Nanoindentation Creep Behavior of 60niti Alloy: Individual and Coupling Effects

Effects of creep and oxidation on reduced modulus in high-temperature nanoindentation

Measurement of Creep Stress Exponent of TC17 Titanium Alloy by Nanoindentation Method at Room Temperature

Nanoindentation size effects of mechanical and creep performance in Ni-based superalloy

Nanoindentation creep deformation behaviour of high nitrogen nickel-free austenitic stainless steel

Effects of loading rate and peak load on nanoindentation creep behavior of DD407Ni-base single crystal superalloy

Experimental characterization of flat indentation creep behaviour of Inconel 617

Room Temperature Nanoindentation Creep of Nanoscale Ag/Fe Multilayers

Nanoindentation creep behavior of diverse microstructures in a pre-strained interstitial high-entropy alloy by high-throughput mapping

Effects of Pre-Creep on Dislocation and Tensile Property of Cr-Ni Steel

Microstructural Evolution and Its Influence on Creep and Stress Relaxation in Nanocrystalline Ni

Room temperature nanoindentation creep behavior of CoNiCrMo-based high entropy amorphous alloy coatings prepared by HVAF

Nano-Indentation Creep Behavior of the Vacuum Electron Beam Weldment of 12cr10co3w2monivnbnb Heat Resistant Steel

Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy

Creep Behavior and Microstructure Evolution of Ni-based Alloy IN617 at 1000 °C

Creep damage mechanism of 20Cr32Ni1Nb steel at high temperatures

Nanoindentation study on room-temperature creep behavior of Ir33Ni28Ta39 bulk metallic glass

Loading rate sensitivity of nickel-based single crystal superalloys characterized by nanoindentation

Indentation behavior of creep-feed grinding induced gradient microstructures in single crystal nickel-based superalloy

Nanoindentation and indentation creep analysis of diffusion bonded of inconel 718 and AISI 304L stainless steel joint interface