Abstract:The elucidation of creep-fatigue damage mechanisms is still controversial for high-temperature structures after surface strengthening treatments, which serves as a critical foundation for the development of an accurate life prediction method. In this work, a numerical procedure is constructed for the prediction of creep-fatigue life improvement, where a dual-scale modeling approach is proposed to integrate important strengthening factors and microstructure features. The macro-scale finite element (FE) simulation aims to investigate the cyclic deformation behavior in a notched structure by using a viscoplastic constitutive model. The initial stress field is predetermined based on the experimental residual stress. The micro-scale FE analysis is employed to investigate the local damage evolution occurring at the notched root by combining size-dependent crystal plasticity with grain boundary cavity model. The cycle-by-cycle deformation histories are extracted from the macro-scale FE model and subsequently are utilized as boundary conditions in the micro-scale FE one. From the experimental perspective, the submerged micro-abrasive waterjet peening (SMA-WJP) process is carried out for creep-fatigue life improvement of the notched structure. Results shows that the notched structure treated by the SMA-WJP process forms an obvious plastic layer with the depth of 20 μm and residual stress with the maximum value of -926 MPa. The predicted numbers of cycles to crack initiation agree with the creep-fatigue experimental ones before and after SMA-WJP. In detail, the surface residual stress and plastic layer are unable to suppress the cavity nucleation on the grain boundaries of internal material. As a consequence, the creep-fatigue life improvement is diminished as the hold time increases, which can be accurately predicted by the developed numerical procedure.

Cyclic microstructure analysis, crack propagation and life prediction of Inconel 750H considering the slip fracture energy

A novel very-high-cycle-fatigue life prediction model with interior microstructure induced cracking behavior of Inconel-713C superalloy at 25 °C, 750 °C and 1000 °C

Creep‐fatigue Deformation Characteristics and Life Prediction Model of Inconel 718 Superalloy under Hybrid Stress–strain‐controlled Mode

Creep-fatigue damage mechanisms and life prediction based on crystal plasticity combined with grain boundary cavity model in a nickel-based superalloy at 650°C

Experimental and Modeling Study on Small Fatigue Crack Initiation and Propagation Behavior of Inconel 617

Fatigue and Fracture Behavior of Nickel-Based Superalloy Inconel 718 Up to the Very High Cycle Regime

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

A dual-scale modelling approach for creep-fatigue crack initiation life prediction of holed structure in a nickel-based superalloy

The low cycle fatigue property, damage mechanism, and life prediction of additively manufactured Inconel 625: Influence of temperature

Microstructure evolution, failure mechanism and life prediction of additively manufactured Inconel 625 superalloy with comparable low cycle fatigue performance

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

Mechanisms of deformation, damage and life behavior of inconel 617 alloy during creep-fatigue interaction at 700 °C

Life prediction and damage analysis of creep-fatigue combined with high-low cycle loading by using a crystal plasticity-based approach

Failure mechanism and life correlation of Inconel 718 in high and very high cycle fatigue regimes

Creep-fatigue life prediction of notched structure after an advanced surface strengthening treatment in a nickel-based superalloy at 650°C

Studies of High-Temperature Fatigue Behavior and Mechanism for Nickel-Based Superalloy Inconel 625

A unified material model for multiaxial ductile fracture and extremely low cycle fatigue of Inconel 718

Crystal Plasticity Modeling and Analysis for the Transition from Intergranular to Transgranular Failure in Nickel-based Alloy Inconel 740H at Elevated Temperature

Computational Analysis of Fatigue Crack Propagation at Elevated Temperature for In718

A unified rule for high-cycle and low-cycle fatigue life prediction in multi-scale framework

Multi-stage dwell fatigue crack growth behaviors in a nickel-based superalloy at elevated temperature