Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

A unified rule for high-cycle and low-cycle fatigue life prediction in multi-scale framework

Multi-axial Creep-Fatigue Life Prediction Considering History-Dependent Damage Evolution: A New Numerical Procedure and Experimental Validation

A general energy-based model for fatigue life prediction of high-temperature structural materials

A Novel Energy-Critical Multiaxial Fatigue Life Prediction for Low Cycle Fatigue under Mixed-Mode Loading

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

A new data-driven probabilistic fatigue life prediction framework informed by experiments and multiscale simulation

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

A life prediction method and damage assessment for creep-fatigue combined with high-low cyclic loading

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

A Miner's rule based fatigue life prediction model for combined high and low cycle fatigue considering loading interaction effect

Fatigue Life Prediction of Nickel-Based GH4169 Alloy on the Basis of a Multi-Scale Crack Propagation Approach

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

Life prediction and damage analysis of creep-fatigue combined with high-low cycle loading by using a crystal plasticity-based approach

A nonlinear cumulative fatigue damage life prediction model under combined cycle fatigue loading considering load interaction

A unified criterion for fatigue–creep life prediction of high temperature components

An Efficient Life Prediction Methodology For Low Cycle Fatigue-Creep Based On Ductility Exhaustion Theory

Low-Cycle Fatigue Life Prediction Under Multiaxial Non-Proportional Loads

A new multiaxial fatigue life prediction model considering additional hardening effect

A New Method for Low Cycle Fatigue Life Prediction

A New Critical Plane-Energy Model for Multiaxial Fatigue Life Prediction of Turbine Disc Alloys