Abstract:A high cycle fatigue life prediction model based on continuum damage mechanics, crystal plas-ticity and critical distance theory is developed. A novel damage evolution law for anisotropic Ni-based single crystal materials built on continuum damage mechanics is proposed. The crystal plasticity framework was introduced to take into account the particular characteristics of high cycle fatigue. The critical distance theory was innovatively applied to the structure of film cooling holes to predict the lifetime for materials under a multiaxial stress state. High cycle fatigue tests considering drilling technology, stress ratio and creep time were performed using Ni-based single crystal superalloy plates with film cooling holes. The constitutive equations were implemented into a finite element framework to simulate the high cycle fatigue properties of Ni-based single crystal superalloys, and the results of numerical calculations were compared with experimental observations. It was demonstrated that the constitutive formulations proposed in the present study can be used to model the mechanical behavior of Ni-based single crystal superalloys under a multiaxial stress state. The life prediction errors are found to be within the factor-of-three scatter band. The fatigue life of the specimen with ultrafast laser drilled film cooling holes is larger than that with electrostream machined film cooling holes under the same test conditions. The fatigue strength of the specimen with film cooling holes at a stress ratio R = 0.95 is higher than that at a stress ratio R =-1. The life of the specimen with film cooling holes is found to decrease with increasing creep time before high cycle fatigue. The gamma/gamma'-microstructure evolution in the speci-mens with film cooling holes is related to the kinetics of the stress redistribution during the fa-tigue process. A minimum stress level is essential for rafting to occur. The damage distribution for the plate model is in line with the crack initiation location and propagation region of the specimen.

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

High Cycle Fatigue Life Prediction Model Based on Crystal Plasticity and Continuum Damage Mechanics for Ni-based Single Crystal Superalloys under a Multiaxial Stress State

Multiaxial Fatigue Life Prediction Model Based on Critical Plane Approach

Multiaxial Fatigue Life Prediction for Powder Metallurgy Superalloy FGH96 Based on Stress Gradient Effect

Multiaxial Fatigue Damage Parameter and Life Prediction without Any Additional Material Constants

Multiaxial Fatigue Damage Parameter and Life Prediction under Low Cycle Loading for Gh4169 Alloy and Other Structural Materials

A New Critical Plane-Energy Model for Multiaxial Fatigue Life Prediction of Turbine Disc Alloys

Multiaxial Fatigue Damage Parameter and Life Prediction for Medium-Carbon Steel Based on the Critical Plane Approach

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

Prediction of fatigue lifetime under multiaxial cyclic loading using finite element analysis

Multiaxial Fatigue Damage Model with Three Parameters Based on the Critical Plane Approach

Prediction of Fatigue Life under Multiaxial Loading by Using a Critical Plane-Based Model

New strain energy-based critical plane approach for multiaxial fatigue life prediction

A Sectional Critical Plane Model for Multiaxial High-Cycle Fatigue Life Prediction

Low-Cycle Fatigue Life Prediction Under Multiaxial Non-Proportional Loads

Fatigue Life Prediction for GH4169 Superalloy Under Multiaxial Variable Amplitude Loading

Multiaxial Notch Fatigue Life Prediction Based on the Dominated Loading Modes under Variable Amplitude Loading

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

Multiaxial Fatigue Life Evaluation Using Strain Energy -Based Critical Plane Approach

Multiaxial fatigue life prediction under proportional and non-proportional loading at high temperature