Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

Damage Evolution Model Considering Fatigue Failure Factor Under Multiaxial Non-Proportional Loading

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

A New Approach for Studying Fatigue Damage

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading

A new multiaxial fatigue life prediction model considering additional hardening effect

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

A nonlinear cumulative fatigue damage life prediction model under combined cycle fatigue loading considering load interaction

Physical description and model validation of welded joint fatigue damage evolution

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Structural mechanics model for anisotropic damage and fatigue life prediction method of face-centered cubic metal materials

A novel fatigue-oxidation-creep life prediction method under non-proportional loading

An improved nonlinear cumulative damage model for strength degradation considering loading sequence

Damage Proportion Analysis of the Combined High and Low Cycle Fatigue Based on the Continuum Damage Mechanics

A novel two-scale nonlinear damage accumulation model for vibration fatigue life prediction

Multiaxial Fatigue Damage Parameter and Life Prediction without Any Additional Material Constants

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion