Abstract:Due to the advantages of high-temperature resistance, low thermal expansion coefficient, and thermal shock resistance, etc., graphite is regarded as one of the materials for the first wall of nuclear fusion devices. The real-time monitoring of temperature distribution of the first wall based on an infrared camera is widely used to guarantee the stable operation of devices. To accurately measure the temperature of the first wall, it is important to measure the normal emissivity of graphite. However, the emissivity of graphite is affected by many factors. For example, the effect of the surface layers, like carbon-hydro layers-layers, will influence the measurement of the emissivity. The ambition of this work is to study the relationship between graphite emissivity and infrared camera with filters of different wavelengths and the roughness of graphite, and then give the proposed emissivity model to improve the accuracy of graphite surface temperature measurement. The experiment is carried out with a FLIR infrared camera and calibrated by using a blackbody furnace. The emissivity at given temperatures is systematically investigated. By using an infrared camera with no filter (band wavelength range of 7.5 ∼13 μm), a 10.2±0.1 μm filter, and a 10.8±0.19 μm filter, this paper studies the relationship between the temperature and emissivity of graphite from 150℃ to 500℃ and calculates the relative error of temperature measurement respectively. A suitable fitting model which fits emissivity curves is selected. The measurement results show the use of a 10.2 μm filter to measure the graphite surface temperature has the smallest relative error, the range is 0.90%∼1.17%. The emissivity of graphite with different roughness is also studied. At the same temperature, the greater the roughness of the graphite surface, the higher the emissivity value. The uncertainty of the emissivity measurement is analyzed, and its value is 0.0099∼0.0211. The graphite surface temperature measurement method based on the emissivity model proposed in this paper provides useful references for the non-contact temperature measurement of the first wall in nuclear fusion devices. The research results can be used as a reference for plasma experiments in some fusion devices and other similar applications.

Measurements of emissivity and temperature for polarized long-wavelength infrared light from tungsten under simulating tokamak conditions

Infrared Directional Spectral Emissivity of Tungsten-Copper Alloy in the 400–700 °C Temperature Range

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

Measurements of Temperature and Emissivity Distributions on a High-Temperature Surface Using an Auxiliary Light Source Method

Temperature dependent polarization of the thermal radiation emitted by thin, hot tungsten wires

Spectroscopic analysis of tungsten spectra in extreme-ultraviolet range of 10-480 Å observed from EAST tokamak with full tungsten divertor

432- Μ M Laser’s Beam-Waist Measurement for the Polarimeter/interferometer on the EAST Tokamak

Measurement of High-Temperature Spectral Emissivity Using Integral Blackbody Approach

Research on the normal emissivity of graphite between 150 and 500 °C by an infrared camera for nuclear fusion devices

Temperature Measuring System in High Temperature Carbon Reducing Environment

Temperature Measurements of High-Temperature Semi-Transparent Infrared Material Using Multi-Wavelength Pyrometry

Non-inductive Vertical Position Measurements by Faraday-effect Polarimetry on EAST Tokamak.

Polarized thermal emission by thin metal wires

Application of Dual-Polarization Frequency-Modulated Microwave Reflectometer to J-Text Tokamak

Measurements of the directional spectral emissivity based on a radiation heating source with alternating spectral distributions

Investigation of the Sawtooth Behaviors by Using the J-TEXT Three-Wave Polarimeter-Interferometer

Measuring the Dynamic Polarizability of Tungsten Atom Via Electrical Wire Explosion in Vacuum

Effects of Stray Lights on Faraday Rotation Measurement for Polarimeter-Interferometer System on EAST.

Design of Far-Infrared Polarimeter/Interferometer System for East Tokamak

Radiation temperature measurement method for semitransparent materials using one-channel infrared pyrometer.

Investigation of High-Temperature Normal Infrared Spectral Emissivity of ZrO2 Thermal Barrier Coating Artefacts by the Modified Integrated Blackbody Method