Abstract:With the development of aerospace and fusion engineering, understanding the mechanical behavior of materials under high-temperature conditions has become increasingly important. However, few studies are devoted to the ultra-high temperature range of 2000-3000 degrees C. In this study, with the aim of developing non-contact measuring techniques of mechanical deformation under ultra-high temperature, a high heat flux (similar to 300 MW) comprehensive experimental platform is established, which includes a vacuum chamber, a three-dimensional digital image correlation (3D-DIC) system, infrared radiation thermometers and an electron beam heating system. Using the electron beam heating technique, the tungsten specimen can be heated to over 3000 degrees C. Owing to the use of a vacuum chamber, the thermally induced airflow disturbance at high temperature can be completely removed. Tantalum carbide (TaC) powder is chosen as the speckle material and speckle fabrication technology is developed to adapt ultra-high temperatures under vacuum conditions. In order to suppress the blackbody radiation at high temperature, three schemes based on blue light sources, self-radiating light sources and a dual wavelength optical filter technique are designed for three temperature ranges from room temperature to 3067 degrees C. Afterwards, full-field thermal deformation of the tungsten specimen above 3000 degrees C was determined based on the above strategies using the 3D-DIC technique. The feasibility and accuracy of the proposed methods are verified by comparing the measurement results with the thermal expansion strain data and model from available databases and literature. The standard deviations in different temperature intervals are 50 mu epsilon for 25-1200 degrees C, 100-200 mu epsilon for 1200-1800 degrees C and less than 500 mu epsilon for 1800-3067 degrees C. The proposed methods and technologies are expected to lay a foundation for further developments in strain field measurements at ultra-high temperature.

Infrared Directional Spectral Emissivity of Tungsten-Copper Alloy in the 400–700 °C Temperature Range

Effect of High Temperature Annealing on the Microstructure and Thermal Shock Resistance of Tungsten Coatings Grown by Chemical Vapor Deposition

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Measurement of Directional Spectral Emissivity at High Temperatures

Spectral, Directional Emittance of Stainless Steel at Elevated Temperatures

Normal Spectral Emissivity Measurement Study of High-Temperature Alloy (316L) at 673–1273 K with a Thermal Oxidation Surface

Measurements of emissivity and temperature for polarized long-wavelength infrared light from tungsten under simulating tokamak conditions

Sapphire Optic Fiber Thermometer for High Temperature in Tundish

Spectral, Directional Emittance at Elevated Temperatures for Various Materials

Influences of temperatures on tungsten copper alloy prepared by microwave sintering

Normal Spectral Emissivity Measurement on Five Aeronautical Alloys

Temperature dependent polarization of the thermal radiation emitted by thin, hot tungsten wires

Spectral emissivity of copper and nickel in the mid-infrared range between 250 and 900 $^{\circ}$C

Measurements of the directional spectral emissivity based on a radiation heating source with alternating spectral distributions

In-situ Measurement Method for Surface Temperature and Normal Spectral Emissivity of TC-4 High-Temperature Alloy Based on Thin Film Interference Mechanism Model

Development of An Apparatus for the Directional Spectral Emissivity Measurement from 50 °C to 1000 °C

Measurement of High-Temperature Spectral Emissivity Using Integral Blackbody Approach

The research on improving the anti-oxidation of tungsten rhenium alloy wires

Validation of the Wiedemann-Franz Law in Solid and Molten Tungsten above 2000 K through Thermal Conductivity Measurements via Steady-State Temperature Differential Radiometry

Strain Field Measurements over 3000 °C Using 3D-Digital Image Correlation