Abstract:Surface damage and structure evolution of the full tungsten ITER divertor under transient heat loads is a key concern for component lifetime and plasma operations. Recrystallization caused by transients and steady-state heat loads can lead to degradation of the material properties and is therefore one of the most serious issues for tungsten armor. In order to investigate the thermal response of the recrystallized tungsten under edge localized mode-like transient thermal loads, fully recrystallized tungsten samples with different average grain sizes are exposed to cyclic thermal shocks in the electron beam facility JUDITH 1. The results indicate that not only does the microstructure change due to recrystallization, but that the surface residual stress induced by mechanical polishing strongly influences the surface cracking behavior. The stress-free surface prepared by electro-polishing is shown to be more resistant to cracking than the mechanically polished one. The resulting surface roughness depends largely on the loading conditions instead of the recrystallized-grain size. As the base temperature increases from room temperature to 400 degrees C, surface roughening mainly due to the shear bands in each grain becomes more pronounced, and sub-grains (up to 3 mu m) are simultaneously formed in the sub-surface. The directions of the shear bands exhibit strong grain-orientation dependence, and they are generally aligned with the traces of {1 1 2} twin habit planes. The results suggest that twinning deformation and dynamic recrystallization represent the predominant mechanism for surface roughening and related microstructure evolution.

Microstructure of Chemical Vapor Transport Deposition Single Crystal Tungsten Coating Working at 1600°C

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Effect of High Temperature Annealing on the Microstructure and Thermal Shock Resistance of Tungsten Coatings Grown by Chemical Vapor Deposition

Effects Of Wc Crystal Characteristics On Microstructure And Mechanical Property Of Hvof-Sprayed Wc-Cocr Coatings

Surface morphology and crystal orientation of electrodeposited tungsten coatings with different pulse parameters

Thermal Performance and Microstructure of Vacuum Plasma Sprayed Tungsten Coatings under Cyclic Heat Load

Deuterium Blistering in Tungsten and Tungsten Vanadium Alloys

Microstructure characterization and wear performance of WC-10Co/Ti-6Al-4V coating fabricated via electron beam cladding

Microstructure and Formation Mechanism of WC Coating on Tungsten Fabricated by Interstitial Carburization: A Multiscale Investigation

Microstructure characteristics and deformation-induced crystalline-to-amorphous phase transformation in thermal barrier coatings during thermal cycling

Microstructure Evolutions of the W–TiC Composite Conducted by Dual-Effects from Thermal Shock and He-ion Irradiation

Epitaxy of Tungsten on Polycrystalline Molybdenum Using Chemical Vapor Transport Deposition Technology

Surface Damage and Structure Evolution of Recrystallized Tungsten Exposed to Elm-Like Transient Loads

Effect of heat treatment on the structural properties of tungsten carbide coatings deposited by RF magnetron sputtering

Evaluation of microstructure and growth kinetics of tungsten carbide ceramics at the interface of iron and tungsten

Microstructure and mechanical properties of W-Ta-V-Cr high-entropy alloy coatings by double glow plasma surface alloying

An Experimental Study of Chemical Vapour Deposition of Tungsten on Ti/TiN Adhesion Bilayers: Mechanical Properties

Microstructure evolution of the W-C hard coatings using directed energy deposition on tungsten alloy surface

Oxidation behavior of the CVD-Al2O3 coatings on tungsten substrate at 1000 °C

Timely and atomic-resolved high-temperature mechanical investigation of ductile fracture and atomistic mechanisms of tungsten