Abstract:A multi-wavelength measurement method for the high-temperature radiation properties of semi-transparent materials heated by high power laser and irradiated by the infrared source with alternating spectral distributions is introduced. The method avoids the strong dependence of existing methods on accurate temperature measurements or emissivity model of semi-transparent samples. The spectral emissivity, reflectance, transmittance and temperature of semi-transparent samples can be determined simultaneously. Furthermore, we established the experimental device, including a FTIR spectrometer (spectral range of 2.0∼16 μm), a 500 W 915 nm fiber laser, and an infrared SiC emitter irradiation source. The radiation properties of the oxidized stainless-steel sample (opaque materials) and n-type, phosphorous-doped silicon wafer sample (semi-transparent materials) were investigated experimentally at different temperatures (400∼800 °C). With the increase of laser power, the upper limit of sample temperature can be extended to higher temperatures. The measurement results show that the infrared spectral emissivity of stainless-steel increases with the increase of temperature. The spectral emissivity of semi-transparent n-type, phosphorous-doped silicon wafer increases with the increase of temperature, while the spectral directional-hemispherical reflectance decreases with the increase of temperature. The results of temperature and wavelength dependent emissivity of silicon wafer sample are consistent with the literatures, which verifies the applicability of the device. The research work provides a useful reference for measuring the high-temperature radiation properties of semi-transparent materials.

Temperature dependent polarization of the thermal radiation emitted by thin, hot tungsten wires

Polarized thermal emission by thin metal wires

Influence of irreversible demagnetization on the polarization of thermal radiation emitted by a hot cobalt wire

Validation of the Wiedemann-Franz Law in Solid and Molten Tungsten above 2000 K through Thermal Conductivity Measurements via Steady-State Temperature Differential Radiometry

Validation of the Wiedemann-Franz Law in solid and molten tungsten above 2000 K through thermal conductivity measurements via steady state temperature differential radiometry

Measurements of emissivity and temperature for polarized long-wavelength infrared light from tungsten under simulating tokamak conditions

Temperature measurements at thoriated tungsten electrodes in a model lamp and their interpretation by numerical simulation

Infrared Directional Spectral Emissivity of Tungsten-Copper Alloy in the 400–700 °C Temperature Range

Thermal conductivity in metallic nanostructures at high temperature: Electrons, phonons, and the Wiedemann-Franz law

Spectroscopic Measurement of Temperatures in Pulsed TIG Welding Arcs

Temperature Control of Thermal Radiation from Composite Bodies

Temperature measurements using multicolor pyrometry in thermal radiation heating environments.

Polarization oscillations of near-field thermal emission

Temperature dependence of near-field radiative heat transfer above room temperature

Nernst-Ettingshausen effect in thin Pt and W films at low temperatures

Nonthermal Effects in H-doped Tungsten at High Electronic Temperatures

Strong linearity and effect of laser heating location in transient photo/electrothermal characterization of micro/nanoscale wires

Measurements of spectral emissivity, reflectance and transmittance at high temperatures using laser heating and auxiliary light source

Polaritonic Waveguide Emits Super-Planckian Thermal Radiation

The photothermal effect in interferometers

Investigation of ultrashort laser excitation of aluminum and tungsten by reflectivity measurements