Abstract:Most microbial fuel cells (MFCs) based sensors rely on exoelectrogenic bacteria to sense contaminants. However, these sensors cannot monitor repeated pollutions unless the exoelectrogenic bacteria are recovered or reinoculated. To overcome this drawback, a novel sediment microbial fuel cell (SMFC) based sensor was developed for online and in situ monitoring of repeated Cu2+ shocks to the overlaying water of paddy soil. The SMFC sensor was operated for a period of eight months in the field environment and a group of CuCl2 solutions ranging from 12.5 to 400mg L-1 Cu2+ were repeatedly applied on sunny and rainy days in different seasons. Results show that the SMFC sensor generates one voltage peak in less than 20 s after each Cu2+ shock, regardless of the seasons and weather conditions, and the voltage increments frombaseline to peak exhibit linear correlation (R-2 > 0.92) with the logarithm of Cu2+ concentrations. Repeated Cu2+ pollutions do not decrease the baseline voltage, indicating that the activity of exoelectrogenic bacteriawas not significantly inhibited. Soil adsorbed and inactivated approximately 99% of total Cu2+. Only1% of total Cu2+ was the toxic exchangeable fraction, of which the concentrations were 0.73, 0.23, and 0.22 mg kg(-1) in the surface (0-3 cm), middle (3-6 cm), and bottom (6-11 cm) layers, respectively. The abundance of 16S rRNA gene transcripts of exoelectrogenic bacteria-associated genera is the lowest in the surface layer (2.86 x 10(11) copies g(-1)) and the highest in the bottom layer (7.99 x 10(11) copies g(-1)). Geobacter, Clostridium, Anaeromyxobacter, and Bacillus are the most active exoelectrogenic bacteria-associated genera in the soil. This study suggests that the SMFC sensor could be applied inwetlands to monitor the repeated discharge of Cu2+ and other heavy metals. (c) 2020 Elsevier B.V. All rights reserved.

Development of miniature self-powered single-chamber microbial fuel cell and its response mechanism to copper ions in high and trace concentration

Microbial Fuel Cell Wastewater Treatment of Copper-Based Heavy Metal Sensor

A dual chamber microbial fuel cell based biosensor for monitoring copper and arsenic in municipal wastewater

An innovative fast-start aerobic anode microbial fuel cell biosensor for copper ion detection

Copper Removal and Microbial Community Analysis in Single-Chamber Microbial Fuel Cell.

Sensing Copper and Ferricyanide Ions in Wastewater Using a Membrane-Less, Easy-to-Use Soil Microbial Fuel Cell-Based Sensor

On-line Monitoring of Repeated Copper Pollutions Using Sediment Microbial Fuel Cell Based Sensors in the Field Environment.

A Novel Sediment Microbial Fuel Cell Based Sensor for On‐Line and in Situ Monitoring Copper Shock in Water

A copper‐specific microbial fuel cell biosensor based on riboflavin biosynthesis of engineered Escherichia coli

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

Using Electrical Signals of Microbial Fuel Cells to Detect Copper Stress on Soil Microorganisms

Copper removal and microbial community analysis in a single medium sediment microbial fuel cell

Effect of Cuo/Zno/Fto Electrode Properties on the Performance of a Photo-Assisted Microbial Fuel Cell Sensor for the Detection of Heavy Metals

Enhanced copper removal and bioelectricity generation in sediment microbial fuel cells through biostimulation and bioaugmentation

Development of heavy metals toxic sensors for double-microbial fuel cell

A Double-microbial Fuel Cell Heavy Metals Toxicity Sensor

Cost-effective Copper Removal by Electrosorption Powered by Microbial Fuel Cells.

Soil Microbial Fuel Cell Based Self-Powered Cathodic Biosensor for Sensitive Detection of Heavy Metals

Cuo/Zno Based Photo Microbial Fuel Cell: A More Sensitive Heavy Metal Biosensor

Effect of CuO/ZnO/FTO electrode properties on the performance of a photo-microbial fuel cell sensor for the detection of heavy metals

Microbial fuel cell (MFC)-based biosensor for combined heavy metals monitoring and associated bioelectrochemical process