Abstract:Microbial fuel cells (MFCs) use bacteria to convert chemical energy in an organic substrate to electrical energy. MFC biosensoric capabilities are based on its ability to detect a change in current or voltage caused by the introduction of an analyte. The operating principle is the linear relationship between the analyte concentration and the current output in the biosensor. The objective of this review is to provide an overview of the application of MFC biosensors for water and wastewater monitoring through biological/chemical oxygen demand (BOD/COD) or toxicity. While most reviews focus on operating principles and designs/configurations of MFC biosensors, this review mainly covers microbial consortium, current generation mechanisms and performance indicators. Factors affecting operation and challenges of the technology are also discussed. MFC biosensors have been widely investigated because of their simple architecture, cost-effective construction and their potential self-sustaining power source. An efficient MFC biosensor must be capable of rapid and precise in situ monitoring of a target compound, have long operational stability with low maintenance requirements and quick recovery after sudden disturbance. MFC biosensor performance is limited by several factors, including electron transfer at the anode, substrate concentration, internal resistance of the system and environmental variables (i.e., temperature and pH). These limitations could be minimized by improving the reactor materials, design and operation. However, practical applications have proven that improving one factor does not necessarily result in an overall improvement in performance. The key to an efficient biosensor is establishing a combination of conditions that allow optimal performance of the biosensor without compromising sensitivity or stability. Microbial fuel cells (MFCs) use bacteria to convert chemical energy in an organic substrate to electrical energy. MFC biosensoric capabilities are based on its ability to detect a change in current or voltage caused by the introduction of an analyte. MFC biosensors have been widely investigated because of their simple architecture, cost-effective construction and their potential self-sustaining power source. An efficient MFC biosensor must be capable of rapid and precise in situ monitoring of a target compound, have long operational stability with low maintenance requirements and quick recovery after sudden disturbance. In water and wastewater monitoring, MFCs can offer the capability of simultaneous treatment of contaminated medium and generation of a measured concentration response within a short response time, in contrast with traditional methods. The biosensing element of MFC biosensors will be an electroactive microorganism at the anode or cathode electrode surface.

Enhancing Signal Output and Avoiding BOD/Toxicity Combined Shock Interference by Operating a Microbial Fuel Cell Sensor with an Optimized Background Concentration of Organic Matter

Microbial fuel cell sensors for water quality early warning systems: Fundamentals, signal resolution, optimization and future challenges

The Evaluation of Long Term Performance of Microbial Fuel Cell Based Pb Toxicity Shock Sensor.

Enhanced Detection of Toxicity in Wastewater Using a 2D Smooth Anode Based Microbial Fuel Cell Toxicity Sensor

A Novel Microbial Fuel Cell Sensor with Biocathode Sensing Element.

Enhancing sensitivity of microbial fuel cell sensors for low concentration biodegradable organic matter detection: Regulation of substrate concentration, anode area and external resistance

Microbial Fuel Cell-Based Organic Matter Sensors: Principles, Structures and Applications

Microbial Fuels Cell-Based Biosensor For Toxicity Detection: A Review

Factors Affecting the Performance of a Single-Chamber Microbial Fuel Cell-Type Biological Oxygen Demand Sensor

Sequential flowing membrane-less microbial fuel cell using bioanode and biocathode as sensing elements for toxicity monitoring

Biotoxicity monitoring of Bisphenol A using microbial fuel cell sensors: Optimizing the response of sensor's voltage changes to toxicity and assessing the impact on the application to river water monitoring

Comparative Analysis of Microbial Fuel Cell Based Biosensors Developed with a Mixed Culture and Shewanella Loihica PV-4 and Underlying Biological Mechanism.

Enhancement of the sensitivity of a microbial fuel cell sensor by transient-state operation

Enhanced Quorum Sensing of Anode Biofilm for Better Sensing Linearity and Recovery Capability of Microbial Fuel Cell Toxicity Sensor.

Influence of Wastewater Microbial Community on the Performance of Miniaturized Microbial Fuel Cell Biosensor.

Microbial Fuel Cell Sensors for Water and Wastewater Monitoring

Performance of Mediator-Less Double Chamber Microbial Fuel Cell-Based Biosensor for Measuring Biological Chemical Oxygen

A Novel Microbial Fuel Cell Sensor with a Gas Diffusion Biocathode Sensing Element for Water and Air Quality Monitoring.

Low Temperature Acclimation of Electroactive Microorganisms May Be an Effective Strategy to Enhance the Toxicity Sensing Performance of Microbial Fuel Cell Sensors

Microbial Fuel Cell Biosensor with Capillary Carbon Source Delivery for Real-Time Toxicity Detection

Optimization of Sensing Performance in an Integrated Dual Sensors System Combining Microbial Fuel Cells and Upflow Anaerobic Sludge Bed Reactor