Abstract:Microbial fuel cells (MFCs) use bacteria to convert chemical energy in an organic substrate to electrical energy. MFC biosensoric capabilities are based on its ability to detect a change in current or voltage caused by the introduction of an analyte. The operating principle is the linear relationship between the analyte concentration and the current output in the biosensor. The objective of this review is to provide an overview of the application of MFC biosensors for water and wastewater monitoring through biological/chemical oxygen demand (BOD/COD) or toxicity. While most reviews focus on operating principles and designs/configurations of MFC biosensors, this review mainly covers microbial consortium, current generation mechanisms and performance indicators. Factors affecting operation and challenges of the technology are also discussed. MFC biosensors have been widely investigated because of their simple architecture, cost-effective construction and their potential self-sustaining power source. An efficient MFC biosensor must be capable of rapid and precise in situ monitoring of a target compound, have long operational stability with low maintenance requirements and quick recovery after sudden disturbance. MFC biosensor performance is limited by several factors, including electron transfer at the anode, substrate concentration, internal resistance of the system and environmental variables (i.e., temperature and pH). These limitations could be minimized by improving the reactor materials, design and operation. However, practical applications have proven that improving one factor does not necessarily result in an overall improvement in performance. The key to an efficient biosensor is establishing a combination of conditions that allow optimal performance of the biosensor without compromising sensitivity or stability. Microbial fuel cells (MFCs) use bacteria to convert chemical energy in an organic substrate to electrical energy. MFC biosensoric capabilities are based on its ability to detect a change in current or voltage caused by the introduction of an analyte. MFC biosensors have been widely investigated because of their simple architecture, cost-effective construction and their potential self-sustaining power source. An efficient MFC biosensor must be capable of rapid and precise in situ monitoring of a target compound, have long operational stability with low maintenance requirements and quick recovery after sudden disturbance. In water and wastewater monitoring, MFCs can offer the capability of simultaneous treatment of contaminated medium and generation of a measured concentration response within a short response time, in contrast with traditional methods. The biosensing element of MFC biosensors will be an electroactive microorganism at the anode or cathode electrode surface.

Performance of Mediator-Less Double Chamber Microbial Fuel Cell-Based Biosensor for Measuring Biological Chemical Oxygen

Measurement of biochemical oxygen demand from different wastewater samples using a mediator-less microbial fuel cell biosensor

A single-chamber microbial fuel cell for rapid determination of biochemical oxygen demand using low-cost activated carbon as cathode catalyst

Impact of Air-Cathodes on Operational Stability of Single-Chamber Microbial Fuel Cell Biosensors for Wastewater Monitoring

Microbial Fuel Cell-Based Biosensors

Microbial Fuel Cell Sensors for Water and Wastewater Monitoring

A Novel Microbial Fuel Cell Sensor with Biocathode Sensing Element.

A dual chamber microbial fuel cell based biosensor for monitoring copper and arsenic in municipal wastewater

A Low-Cost Microbial Fuel Cell Based Sensor for In-Situ Monitoring of Dissolved Oxygen for over Half a Year.

Enhancing Signal Output and Avoiding BOD/Toxicity Combined Shock Interference by Operating a Microbial Fuel Cell Sensor with an Optimized Background Concentration of Organic Matter

Microbial fuel cell sensors for water quality early warning systems: Fundamentals, signal resolution, optimization and future challenges

An in-depth study of substrate effect on the performance of BOD sensor type microbial fuel cell

Microbial Fuel Cell Biosensor with Capillary Carbon Source Delivery for Real-Time Toxicity Detection

Open External Circuit for Microbial Fuel Cell Sensor to Monitor the Nitrate in Aquatic Environment.

Progresses And Prospects Of Microbial Fuel Cell In Analytical Applications

A Novel Microbial Fuel Cell Sensor with a Gas Diffusion Biocathode Sensing Element for Water and Air Quality Monitoring.

Enhancing sensitivity of microbial fuel cell sensors for low concentration biodegradable organic matter detection: Regulation of substrate concentration, anode area and external resistance

Expression patterns of connexin genes in mouse retina

Microbial Fuel Cell-Based Organic Matter Sensors: Principles, Structures and Applications

Microbial fuel cell based biosensor for in situ monitoring of anaerobic digestion process.

Microbial fuel cell-based biosensor for online monitoring wastewater quality: A critical review