Abstract:Sediments play an important role in determining the quality of lakes, rivers and oceans as they can act as either a source or sink for pollutants. Once the input pollution is controlled, sediments as a secondary source of pollution can release the accumulated pollutants to overlying water.1 The organic matter content of sediments can also affect the structure of macroinvertebrate assemblages.2 To date, traditional sediments remediation methods include monitored natural recovery, in-situ treatment, and ex-situ treatment.3 The traditional methods are either expensive or not environmentally friendly, so it is crucial to find a cost-effective and environmentally friendly way to solve the contaminated sediments problem. Microbial fuel cell (MFC) technology is considered an environmentally friendly and promising approach for converting wastewater or solid waste into electricity.4–6 Recently, some studies have shown that sediment microbial fuel cell (SMFC) can alter the properties and enhance the removal of organic matter in sediment.7–9 Wang9 developed a three-dimensional floating biocathode to dispose river sediments, and concluded that the sediment organic matter content near the anode was removed by 29 %. Hong7 found that sediment organic matter around the electrodes became more humified, aromatic, and polydispersed, and had a higher average molecular weight, along with its partial degradation and electricity generation compared to that of the original sediment. Sajana10 studied the performance of SMFC by adding cellulose in freshwater and demonstrated effective cellulose degradation from aquaculture pond sediment and maintained the oxidized sediment top layer favourable for aquaculture. Zhou11 improved the SMFC performance by amendment of colloidal iron oxyhydroxide into sediments and concluded that high Fe(II) concentration in pore water of sediments led to high power production. Song12 found that the addition of biomass in appropriate proportions can enhance output power in SMFC. However, mass transfer limitations for electron donors to reach the anode and a low rate of oxygen reduction in cathodes were major limitations for power production.13 In freshwater environments, the maximum power densities in SMFC with felt graphite14 and carbon paper15 as cathode were 4 mW m–2 and 2 mW m–2 respectively. Song13 constructed SMFC with granule activated carbon cathode and stainless steel anode and obtained 3.5 mW m–2 maximum power density, and further increased to 11.2 mW m–2 by adding cellulose. Jiang16 built MFC with graphite fiber brush and enhanced TCOD removal rate from 11.3 % to 19.2 % for raw sludge. Removal and Changes of Sediment Organic Matter and Electricity Generation by Sediment Microbial Fuel Cells and Amorphous Ferric Hydroxide

Enhancing bioelectricity production and copper remediation in constructed single-medium plant sediment microbial fuel cells

Enhanced copper removal and bioelectricity generation in sediment microbial fuel cells through biostimulation and bioaugmentation

Copper removal and microbial community analysis in a single medium sediment microbial fuel cell

New Process for Copper Migration by Bioelectricity Generation in Soil Microbial Fuel Cells.

Promoting removal of copper from sediment and production of bioelectricity by sediment microbial fuel cells using tea extracts

Copper Removal and Microbial Community Analysis in Single-Chamber Microbial Fuel Cell.

Response of different plants to ecological floating bed-microbial fuel cells: Decontamination and power generation

Electricity Generation by Urban Black Smelly River Sediment-MFC and the Effect on Sediment Remediation

Bioelectricity generation by wetland plant-sediment microbial fuel cells (P-SMFC) and effects on the transformation and mobility of arsenic and heavy metals in sediment

Accelerating treatment of copper-containing wastewater by microbial fuel cells in series

Simultaneous Bioelectricity Generation and Pollutants Removal of Sediment Microbial Fuel Cell Combined with Submerged Macrophyte

Effect of Electrode Distances on Remediation of Eutrophic Water and Sediment by Sediment Microbial Fuel Cell Coupled Floating Beds

Pollutant Removal and Bioelectricity Generation from Urban River Sediment Using a Macrophyte Cathode Sediment Microbial Fuel Cell (Msmfc).

Simultaneous Sulfide Removal and Electricity Generation with Corn Stover Biomass As Co-Substrate in Microbial Fuel Cells

Microbial Fuel Cell Driving Electrokinetic Remediation of Toxic Metal Contaminated Soils.

Effect of Soil Type on Heavy Metals Removal in Bioelectrochemical System.

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

Application of microbial fuel cell technology to the remediation of compound heavy metal contamination in soil

Removal of sulfur and nitrogen pollutants in a sediment microbial fuel cell coupled with Vallisneria natans: Efficiency, microbial community structure, and functional genes

Bioelectrochemical Chromium(VI) Removal in Plant-Microbial Fuel Cells

Removal and Changes of Sediment Organic Matter and Electricity Generation by Sediment Microbial Fuel Cells and Amorphous Ferric Hydroxide