Abstract:Since only a few studies of the optimal ratio of MFC cathode composite materials by response surface methodology (RSM) have been published, in this study RSM is used to design a composite cathode with both low resistance and high copper adsorption. This composite cathode can be used in an MFC to improve its performance and provide multiple advantages, such as high copper removal and high power production.SummaryMicrobial fuel cells (MFCs) have the potential to remove copper ions from wastewater, but the high cost of their cathode materials and their limited effectiveness in removing copper ions have limited their commercialization. In this study, a composite cathode was developed using response surface methodology (RSM); peanut shells were used to produce biochar, which was compounded with conductive carbon black (CCB). When 83% of the cathode material was biochar, its resistance was low and its copper adsorption capacity was high. An MFC with such a composite cathode removed 95% of copper from wastewater within 5 days, which is 1.52 times more than that removed using a CCB cathode MFC. Although the power production capacity of the composite cathode MFC was slightly lower than that of the CCB cathode MFC, the composite cathode achieved 56% of the power output of the CCB cathode MFC using only 17% of the CCB, significantly reducing the cost of cathode production. The optimized composite biochar cathode that was developed using RSM provides both low resistance and a high copper adsorption capacity, and can be used in MFCs to improve their removal of copper ions from wastewater. This investigation also demonstrates the potential of agricultural waste as an electrode material in MFCs, reducing their production cost and improving their performance.

Accelerating treatment of copper-containing wastewater by microbial fuel cells in series

Sewage Sludge-Derived Carbon-Doped Manganese As Efficient Cathode Catalysts in Microbial Fuel Cells

Comparison of Sulfide Removal and Electricity Generation in Microbial Fuel Cells

High-performance bacterium-enhanced dual-compartment microbial fuel cells for simultaneous treatment of food waste oil and copper-containing wastewater

Increasing Efficiencies of Microbial Fuel Cells for Collaborative Treatment of Copper and Organic Wastewater by Designing Reactor and Selecting Operating Parameters

A New Technology of Microbial Fuel Cell for Treating Both Sewage and Wastewater of Heavy Metal

Increasing the recovery of heavy metal ions using two microbial fuel cells operating in parallel with no power output

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

[Treatment of Cu(2+)-containing Wastewater by Microbial Fuel Cell with Excess Sludge As Anodic Substrate].

Cathodes for microbial fuel cells that improve the removal of copper ions from wastewater concomitant with power generation using the response surface methodology

[Utilization of Copper (Ⅱ) Wastewater for Enhancing the Treatment of Chromium (Ⅵ) Wastewater in Microbial Fuel Cells].

A membrane-free baffled microbial fuel cell for cathodic reduction of Cu(II) with electricity generation.

Enhancing bioelectricity production and copper remediation in constructed single-medium plant sediment microbial fuel cells

[Electricity generation performance of two-chamber microbial full cell in the treatment of simulated wastewater]

Enhanced copper-containing wastewater treatment with MnO2/CNTs modified anode microbial fuel cell

Copper recovery from printed circuit boards leaching solution with bioelectricity generation using microbial fuel cell

New Process for Copper Migration by Bioelectricity Generation in Soil Microbial Fuel Cells.

Simultaneous Sulfide Removal and Electricity Generation with Corn Stover Biomass As Co-Substrate in Microbial Fuel Cells

Copper removal and microbial community analysis in a single medium sediment microbial fuel cell

Bioelectrochemical Recovery of Ammonia-Copper(ii) Complexes from Wastewater Using a Dual Chamber Microbial Fuel Cell.

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode