Separation and recovery of ammonium from industrial wastewater containing methanol using copper hexacyanoferrate (CuHCF) electrodes
Rui Gao,Luiza Bonin,Jose María Carvajal Arroyo,Bruce E Logan,Korneel Rabaey,Bruce E. Logan
DOI: https://doi.org/10.1016/j.watres.2020.116532
IF: 12.8
2021-01-01
Water Research
Abstract:<p>Ammonium is typically removed from wastewater by converting it to nitrogen gas using microorganisms, precluding its recovery. Copper hexacyanoferrate (CuHCF) is known to reversibly intercalate alkali cations in aqueous electrolytes due to the Prussian Blue crystal structure. We used this property to create a carbon-based intercalation electrode within an electrochemical cell. Depending on the electrode potential, it can recover NH<sub>4</sub><sup>+</sup> from wastewater via insertion/regeneration while leaving organics. In the first phase, different binders were evaluated towards creating a stable electrode matrix, with sodium carboxymethyl cellulose giving the best performance. Subsequently, based on voltammetry, we determined an intercalation potential for NH<sub>4</sub><sup>+</sup> removal of + 0.3 V vs. Ag/AgCl, while the regeneration potential of the electrode was + 1.1 V (vs. Ag/AgCl). Using the CuHCF electrodes 95% of the NH<sub>4</sub><sup>+</sup> in a synthetic wastewater containing 56 mM NH<sub>4</sub><sup>+</sup> and 68 mM methanol was removed with an energy input of 0.33 ± 0.01 Wh g<sup>−1</sup> NH<sub>4</sub><sup>+</sup>. A similar removal of 93% was obtained using an actual industrial wastewater (56 mM NH<sub>4</sub><sup>+</sup>, 68 mM methanol, 0.02 mM NO<sub>2</sub><sup>−</sup>, 0.05 mM NO<sub>3</sub><sup>−</sup>, 0.04 mM SO<sub>4</sub><sup>2−</sup> and 0.34 mM ethanol), with an energy input of 0.40 ± 0.01 Wh g<sup>−1</sup> NH<sub>4</sub><sup>+</sup>. In both cases, there was negligible removal of organics. The stability of CuHCF electrodes was evaluated either by open circuit potential monitoring (61 h) or by cyclic voltammetry (50 h, 116 cycles). The stability during cycling of the electrode was determined in both synthetic and real streams for 25 h (125 cycles). The charge density (C cm<sup>−1</sup>) of the CuHCF electrodes declined by 17 % and 19% after 125 cycles in the synthetic stream and the actual wastewater, respectively. This study highlights the possibility of low-cost CuHCF coated electrodes for achieving separation of NH<sub>4</sub><sup>+</sup> from streams containing methanol. The stability of electrodes has been improved but needs to be further enhanced for large-scale applications and long-term operation.</p>
environmental sciences,engineering, environmental,water resources