Abstract:Microbial fuel cells (MFCs) incorporating air-breathing cathodes have emerged as a promising ecofriendly wastewater treatment technology capable of operating on an energy-free basis. However, the inevitable biofouling of these devices rapidly decreases cathodic catalytic activity and also reduces the stability of MFCs during long-term operation. The present work developed a novel microbial separator for use in air-breathing MFCs that protects cathodic catalytic activity. In these modified devices, microbes preferentially grow on the microbial separator rather than the cathodic surface such that biofouling is prevented. Trials showed that this concept provided low charge transfer and mass diffusion resistance values during the cathodic oxygen reduction reaction of 4.6 +/- 1.3 and 17.3 +/- 6.8 U, respectively, after prolonged operation. The maximum power density was found to be stable at 1.06 +/- 0.07 W m-2 throughout a long-term test and the chemical oxygen demand removal efficiency was increased to 92% compared with a value of 83% for MFCs exhibiting serious biofouling. In addition, a cathode combined with a microbial separator demonstrated less cross-cathode diffusion of oxygen to the anolyte. This effect indirectly induced the growth of electroactive bacteria and produced higher currents in air-breathing MFCs. Most importantly, the present microbial separator concept enhances both the lifespan and economics of air-breathing MFCs by removing the need to replace or regenerate the cathode during longterm operation. These results indicate that the installation of a microbial separator is an effective means of stabilizing power generation and ensuring the cost-effective performance of air-breathing MFCs intended for future industrial applications.(c) 2023 The Authors. Published by Elsevier B.V. on behalf of Chinese Society for Environmental Sciences, Harbin Institute of Technology, Chinese Research Academy of Environmental Sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

A Loop of Catholyte Effluent Feeding to Bioanodes for Complete Recovery of Sn, Fe, and Cu with Simultaneous Treatment of the Co-Present Organics in Microbial Fuel Cells.

Efficient in Situ Utilization of Caustic for Sequential Recovery and Separation of Sn, Fe, and Cu in Microbial Fuel Cells

High-performance bacterium-enhanced dual-compartment microbial fuel cells for simultaneous treatment of food waste oil and copper-containing wastewater

Construction of integrated oxygen-rich carbon-based metal-free cathode to simultaneous boost wastewater treatment performance and energy recovery in bio-electro-Fenton system

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

[Treatment of Cu(2+)-containing Wastewater by Microbial Fuel Cell with Excess Sludge As Anodic Substrate].

Enhancement of chromium removal and energy production simultaneously using iron scrap as anodic filling material with pyrite-based constructed wetland-microbial fuel cell

Cathodic Biofouling Control by Microbial Separators in Air-Breathing Microbial Fuel Cells

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode

Enhancing extracellular electron transfer through selective enrichment of Geobacter with Fe@CN-modified carbon-based anode in microbial fuel cells

Increasing Efficiencies of Microbial Fuel Cells for Collaborative Treatment of Copper and Organic Wastewater by Designing Reactor and Selecting Operating Parameters

Copper recovery from printed circuit boards leaching solution with bioelectricity generation using microbial fuel cell

Transitional bimetallic heterostructure catalyst modified anode for microbial fuel cell treatment of high-intensity wastewater

Remediation of Simulated Malodorous Surface Water by Columnar Air-Cathode Microbial Fuel Cells

Research progress on using biological cathodes in microbial fuel cells for the treatment of wastewater containing heavy metals

Increasing the recovery of heavy metal ions using two microbial fuel cells operating in parallel with no power output

Synergistic light irradiation and circuital current for efficient mineralization of recalcitrant organics and sequential recovery of heavy metals from etching terminal wastewater using photo-assisted bioelectrochemical systems

Engineering extracellular electron transfer to promote simultaneous brewing wastewater treatment and chromium reduction

Catalytic membrane cathode integrated in a proton exchange membrane-free microbial fuel cell for coking wastewater treatment

Electricity Generation and Nutrients Removal from High-Strength Liquid Manure by Air-Cathode Microbial Fuel Cells

Simultaneous removal of multiple heavy metals using single chamber microbial electrolysis cells with biocathode in the micro-aerobic environment