Abstract:Since only a few studies of the optimal ratio of MFC cathode composite materials by response surface methodology (RSM) have been published, in this study RSM is used to design a composite cathode with both low resistance and high copper adsorption. This composite cathode can be used in an MFC to improve its performance and provide multiple advantages, such as high copper removal and high power production.SummaryMicrobial fuel cells (MFCs) have the potential to remove copper ions from wastewater, but the high cost of their cathode materials and their limited effectiveness in removing copper ions have limited their commercialization. In this study, a composite cathode was developed using response surface methodology (RSM); peanut shells were used to produce biochar, which was compounded with conductive carbon black (CCB). When 83% of the cathode material was biochar, its resistance was low and its copper adsorption capacity was high. An MFC with such a composite cathode removed 95% of copper from wastewater within 5 days, which is 1.52 times more than that removed using a CCB cathode MFC. Although the power production capacity of the composite cathode MFC was slightly lower than that of the CCB cathode MFC, the composite cathode achieved 56% of the power output of the CCB cathode MFC using only 17% of the CCB, significantly reducing the cost of cathode production. The optimized composite biochar cathode that was developed using RSM provides both low resistance and a high copper adsorption capacity, and can be used in MFCs to improve their removal of copper ions from wastewater. This investigation also demonstrates the potential of agricultural waste as an electrode material in MFCs, reducing their production cost and improving their performance.

A New Technology of Microbial Fuel Cell for Treating Both Sewage and Wastewater of Heavy Metal

Comparison of Sulfide Removal and Electricity Generation in Microbial Fuel Cells

High-performance bacterium-enhanced dual-compartment microbial fuel cells for simultaneous treatment of food waste oil and copper-containing wastewater

[Electricity generation performance of two-chamber microbial full cell in the treatment of simulated wastewater]

A Microbial Fuel Cell Producing Electricity Directly from Municipal Wastewater Treatment

Treatment of domestic sewage with anoxic/oxic membrane-less microbial fuel cell with intermittent aeration

Development of a Novel Membrane-less Microbial Fuel Cell (ML-MFC) with a Sandwiched Nitrifying Chamber for Efficient Wastewater Treatment

Accelerating treatment of copper-containing wastewater by microbial fuel cells in series

Increasing Efficiencies of Microbial Fuel Cells for Collaborative Treatment of Copper and Organic Wastewater by Designing Reactor and Selecting Operating Parameters

[Treatment of Cu(2+)-containing Wastewater by Microbial Fuel Cell with Excess Sludge As Anodic Substrate].

Microbial fuel cell performance for aromatic hydrocarbon bioremediation and common effluent treatment plant wastewater treatment with bioelectricity generation through series‐parallel connection

Synchronously degradation of biogas slurry and triphenyltin chloride in microbial fuel cell

Treatment of Simulated Wastewater by Bio-Cathode Microbial Fuel Cells at different C/N Ratio

Cathodes for microbial fuel cells that improve the removal of copper ions from wastewater concomitant with power generation using the response surface methodology

Synchronous Degradation of Landfill Leachate and Electricity Production by Microbial Fuel Cell

Trickling Filter in a Biocathode Microbial Fuel Cell for Efficient Wastewater Treatment and Energy Production

Multi-anode enhanced the bioelectricity generation in air-cathode microbial fuel cells towards energy self-sustaining wastewater treatment

Microbial fuel cell in long-term operation and providing electricity for intermittent aeration to remove contaminants from sewage

Performance assessment of constructed wetland-microbial fuel cell for treatment of mariculture wastewater containing heavy metals

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

A membrane-free baffled microbial fuel cell for cathodic reduction of Cu(II) with electricity generation.