Vocal fold furrows. A 10-year review of 240 patients.

T. Itoh,H. Kawasaki,I. Morikawa,M. Hirano

DOI: https://doi.org/10.1016/S0385-8146(83)80002-9

Abstract:

What problem does this paper attempt to address?

Treatment of domestic sewage with anoxic/oxic membrane-less microbial fuel cell with intermittent aeration

Guodong Zhang,Duu-Jong Lee,Fangqin Cheng

DOI: https://doi.org/10.1016/j.biortech.2016.07.006

Abstract:An anoxic/oxic microbial fuel cell (MFC) reactor was applied to treat domestic sewage with intermittent aeration at cathodic chamber. The MFC yielded maximum power density of 2.05W/m(3) at current density 6.05A/m(3), 91.7±0.3% chemical oxygen demand (COD) and 98.2±0.3% ammonia-nitrogen (NH3-N) removals could be reached with most of the hydrophilic (HPI), hydrophobic acid (HPO-A), transphilic acid (TPI-A) of the former being consumed with minimal residual aromatics and the most of NH3-N being converted to N2. When the circuit was opened, the COD removal was dropped to 81.1±0.6% and NH3-N to 80.4±0.9% with most of the HPI, TPI-A and hydrophobic neutral (HPO-N) fractions of the former being consumed with excess aromatic residue and 60% of the latter being converted to NO2(-)-N or NO3(-)-N in effluent. Bioelectrochemical reactions in the tested MFC enhance COD and NH3-N removals from domestic sewage.
Multi-anode enhanced the bioelectricity generation in air-cathode microbial fuel cells towards energy self-sustaining wastewater treatment

Li Xie,Fumichika Tanaka,Toshiyuki Yagi,Hideaki Hashimoto,Kyo Ikeru,Takashi Igarashi,Hiroaki Kobayashi,Mitsuhiro Sakoda,Naoko Yoshida

DOI: https://doi.org/10.1016/j.envres.2023.117744

2024-02-15

Abstract:Microbial fuel cells (MFCs) hold considerable promise for harnessing the substantial energy resources present in wastewater. However, their practical application in wastewater treatment is limited by inadequate removal of organic matter and inefficient power recovery. Previous studies have investigated aeration as a method to enhance the removal of organic matter, but this method is energy-intensive. To address this issue, this study proposed using MFC-recovered bioelectricity for aeration, thereby mitigating the associated expenses. An air-cathode MFC with multi-anode was constructed and optimized to maximize electricity supply for aeration. Carbon-felt anodes were chosen as the most effective anode configuration, due to the high abundance of electroactive bacteria and genes observed in the biofilm generated on their surface. By incorporating six carbon felt anodes, the MFC achieved a 1.7 and 1.1 fold enhancement in the maximum power and current density, respectively. The optimized MFC unit achieved a stable current density of 0.32 A/m2 and achieved COD removal of 60% in the long-term operation of 140 days in a 50 L reactor. In a reactor scaled up to 1600 L, 72 MFCs successfully powered a mini air pump work for 10 s after an 81-s charging period. The intermittent aeration resulted in partial increases in DO concentrations to 0.03-3.5 mg/L, which is expected to promote the removal of nitrogen compounds by the nitrification-anammox process. These groundbreaking results lay the foundation for self-sustaining wastewater treatment technologies.
Simultaneous removal of organic matter and nitrogen compounds by partitioned aeration in a 226 L-scale microbial fuel cell

Taiki Yamane,Naoko Yoshida,Mari Sugioka

DOI: https://doi.org/10.1039/d2ra01485h

IF: 4.036

2022-05-19

RSC Advances

Abstract:Although microbial fuel cells (MFCs) have been widely studied as wastewater treatment technologies that convert organic matter to electricity, there are few reports of large-scale MFCs that treat both organic matter and nitrogen compounds. In this study, a 226 L reactor equipped with 27 MFC units was partially aerated at 10% of its total volume. The MFC unit consists of a cylindrical air core covered with a carbon-based air cathode, an anion exchange membrane, and a graphite non-woven fabric anode. The air-cathode MFC with 13 L min −1 aeration rate produced a current density of 0.0012–0.15 A m −2 with 40 to >93% biological oxygen demand (BOD) removal to have an effluent BOD of <5–36 mg L −1 at a hydraulic retention time (HRT) of 12–47 h. Meanwhile, 55 ± 17% of the total nitrogen (TN) was removed, resulting in 9.7 ± 3.8 mg L −1 TN in the effluent, although the TN removal was limited at ≥20 °C. The mono-exponential regression for BOD and TN (≥20 °C) estimated that an HRT of 21 h could meet the Japanese effluent quality standards of BOD and TN. Calculation of the total energy recovered via current generation and energy consumed by aeration suggested an energy consumption of 0.22 kW h m −3 . Decreasing the aeration rate and HRT in the reactor would further reduce energy consumption and increase energy production.

chemistry, multidisciplinary
Development of a Novel Membrane-less Microbial Fuel Cell (ML-MFC) with a Sandwiched Nitrifying Chamber for Efficient Wastewater Treatment

Yuhong Zhou,Simeng Zhao,Lu Yin,Jing Zhang,Yue Bao,Huixiang Shi

DOI: https://doi.org/10.1002/elan.201800232

IF: 3.077

2018-01-01

Electroanalysis

Abstract:A novel membrane-less microbial fuel cell (ML-MFC) which used the baffles instead of the ion exchange membrane (IEM) was developed for ammonium-containing wastewater treatment and electricity generation. By means of installing an ideal nitrifying unit between the anodic and cathodic chamber, the novel ML-MFC accomplished organics degradation and nitrogen removal without additional loop. The removal efficiencies of COD, NH4+-N and TN achieved 97.07 +/- 0.47%, 91.76 +/- 3.32% and 87.66 +/- 1.59%, respectively. Meanwhile, the effluent pH was near neutral and turbidity was quite low. In addition, the maximum power density of 1.007 +/- 0.032W/m(3) was obtained. Combined with the analysis of microbial community, electroactive bacteria (EAB) Desulfovibrio, Comamonas and Thiobacillus were enriched in biofilm. Considering the superior effluent quality and the promising energy potential, the novel ML-MFC has good application prospects in efficient and sustainable wastewater treatment.
A Microbial Fuel Cell Producing Electricity Directly from Municipal Wastewater Treatment

CUI Long-tao,ZUO Jian-e,Fan Ming-zhi

DOI: https://doi.org/10.3969/j.issn.1000-1166.2006.04.001

2006-01-01

Abstract:The electricity production performance of two microbial fuel cells(MFC),which were inoculated with mashed anaerobic sludge supernatant and municipal wastewater respectively,was investigated.The MFC inoculated with mashed anaerobic sludge supernatant could produce electricity very well.The highest voltage reached 433 mV,and the power density was(117.5 mW·m~(-2)) when municipal wastewater taken from BWTP was used as the substrate solutions.The MFC inoculated directly with municipal wastewater could not produce electricity well without salt and nutrient solution.After dosed with the salt and nutrient solution,the performance of MFC was improved obviously.The highest voltage could reach 228.2 mV,and the highest power density was 35.2 mW·m~(-2).And the COD removal efficiencies for both inoculated MFCs were not very high when municipal wastewaters were used as the substrate solution.The maximum COD removal efficiency was only 39.7%,and the maximum Coulombic efficiency was 60.6%.
Effect of Electricity on Microbial Community of Microbial Fuel Cell Simultaneously Treating Sulfide and Nitrate

Jing Cai,Ping Zheng,Yajuan Xing,Mahmood Qaisar

DOI: https://doi.org/10.1016/j.jpowsour.2015.01.165

IF: 9.2

2015-01-01

Journal of Power Sources

Abstract:The effect of electric current on microbial community is explored in Microbial Fuel Cells (MFCs) simultaneously treating sulfide and nitrate. The MFCs are operated under four different conditions which exhibited different characteristics of electricity generation. In batch mode, MFCs generate intermittently high current pulses in the beginning, and the current density is instable subsequently, while the current density of MFCs in continuous mode is relatively stable. All operational parameters show good capacity for substrate removal, and nitrogen and sulfate were the main reaction products. Polymerase Chain Reaction-Denaturing Gradient Gel Electrophoresis (PCR-DGGE) analysis is employed to obtain profiles of the bacterial communities present in inoculum and suspension of four MFCs. Based on the community diversity indices and Spearman correlation analyses, significant correlation exists between Richness of the community of anode chamber and the electricity generated, while no strong correlation is evident between other indexes (Shannon index, Simpson index and Equitability index) and the electricity. Additionally, the results of Principal Component Analysis (PCA) suggest that MFCs suffering from current shock have similar suspension communities, while the others have diverse microbial communities.
Microbial fuel cell performance for aromatic hydrocarbon bioremediation and common effluent treatment plant wastewater treatment with bioelectricity generation through series‐parallel connection

A. Mukherjee,R. Patel,P. Zaveri,M.T. Shah,N.S. Munshi

DOI: https://doi.org/10.1111/lam.13612

2021-11-30

Letters in Applied Microbiology

Abstract:Microbial fuel cell (MFC) is an emerging technology which has been immensely investigated for wastewater treatment along with electricity generation. In the present study, the treatment efficiency of MFC was investigated for hydrocarbon containing wastewater by optimizing various parameters of MFC. Mediator-less MFC (1·2 l) was constructed, and its performance was compared with mediated MFC with Escherichia coli as a biocatalyst. MFC with electrode having biofilm proved to be better compared with MFC inoculated with suspended cells. Analysis of increasing surface area of electrode by increasing their numbers indicated increase in COD reduction from 55 to 75%. Catholyte volume was optimized to be 750 ml. Sodium benzoate (0·721 g l-1 ) and actual common effluent treatment plant (CETP) wastewater as anolyte produced 0·8 and 0·6 V voltage and 89 and 50% COD reduction, respectively, when a novel consortium of four bacterial strains were used. Twenty MFC systems with the developed consortium when electrically connected in series-parallel connection were able to generate 2·3 V and 0·5 mA current. This is the first report demonstrating the application of CETP wastewater in the MFC system, which shows potential of the system towards degradation of complex organic components present in industrial wastewater.

microbiology,biotechnology & applied microbiology
Simultaneous Anaerobic Sulfide and Nitrate Removal in Microbial Fuel Cell

Jing Cai,Ping Zheng

DOI: https://doi.org/10.1016/j.biortech.2012.08.046

IF: 11.4

2013-01-01

Bioresource Technology

Abstract:Two-chamber microbial fuel cells (MFCs) were operated to remove sulfide and nitrate simultaneously using activated sludge in this study. Compared with control experiment, the MFC showed its ability to remove nitrate and sulfide simultaneously and generate electricity. When the external resistance was 1000 0, the initial concentrations of sulfide and nitrate were about 60 and 10.5 mg L-1, respectively, maximum current density of the MFC was 138.31 mA m(-2). In the end of a typical cycle, it decreased to 12.20 mA m(-2). The main end products were nitrogen and sulfate. The microorganisms attached to the anode electrode had electrochemical activity, and the transfer mechanism of electron in MFC was different from that in control MFC. (C) 2012 Elsevier Ltd. All rights reserved.
Improved Performance of Microbial Fuel Cells Enriched with Natural Microbial Inocula and Treated by Electrical Current

Hongjian Lin,Xiao Wu,Curtis Miller,Jun Zhu

DOI: https://doi.org/10.1016/j.biombioe.2013.03.030

IF: 5.774

2013-01-01

Biomass and Bioenergy

Abstract:Microbial fuel cells (MFCs) are increasingly attracting attention as a sustainable technology as they convert chemical energy in organic wastes to electricity. In this study, the effects of different inoculum sources (river sediment, activated sludge and anaerobic sludge) and electrical current stimulation were evaluated using single-chamber air-cathode MFCs as model reactors based on performance in enrichment process and electrochemical characteristics Of the reactors. The result revealed the rapid anodic biofilm development and substrate utilization of the anaerobic sludge-inoculated MFC. It was also found that the river sediment-inoculated MFC achieved the highest power output of 195 mu W, or 98 mW m(-2), due to better developed anodic biofilm confirmed by scanning electron microscopy. The current stimulation enhanced the anodic biofilm attachment over time, and therefore reduced the MFC internal resistance by 27%, increased the electrical capacitance by four folds, and improved the anodic biofilm resilience against substrate deprivation. For mature MFCs, a transient application of a negative voltage (-3 V) improved the cathode activity and maximum power output by 37%. This improvement was due to the bactericidal effect of the electrode potential higher than +1.5 V vs. SHE, demonstrating a substantial benefit of treating MPG cathode after long-term operation using suitable direct electrical current. (C) 2013 Elsevier Ltd. All rights reserved.
Performance of a Dual-Chamber Microbial Fuel Cell Inoculated with Active Soil Microbes for Bioelectricity Generation

L. Tayo,Irene S. Asetre

DOI: https://doi.org/10.1109/ICRERA52334.2021.9598784

2021-09-26

Abstract:Microbial fuel cell (MFC) systems are promising technologies that pose as an efficient alternative renewable energy source. This study evaluated the performance of MFCs inoculated with active soil microorganisms and fed with crab meat processing wastewater, using different proton exchange membranes and different electrode materials, in the production of bioelectricity and chemical oxygen demand (COD) reduction. MFC’s performance were analysed in terms of power density, energy output and COD reduction. COD concentrations were measured using standard Hach® COD kit Method 8000 with high range mercury vials. MFC reactors using titanium mesh wire electrodes demonstrated high open circuit potential (OCP) with peak values of 967 mV and 960 mV for MFC with Nafion membrane (MFC-Nafion) and MFC with gelatinised tapioca starch (MFC-GTS), respectively. Average power density output in closed circuit conditions peaked to as high as 9,908.52 mW/m3 for MFC-GTS reactor using carbon fiber brush electrodes. Energy plotted peaked at 235.88 J for MFC-GTS as a function of time calculated from geometric areal power density. COD reduction in MFC-GTS reactor was 31.05% and 36.06% using titanium wire mesh and carbon fiber brush electrodes, respectively. These results revealed that MFCs inoculated with active soil microbes using organic GTS membrane is a promising technology for bioenergy generation and COD reduction.

Environmental Science,Engineering
Evaluation of organic matter removal and electricity generation by using integrated microbial fuel cells for wastewater treatment

Takahiro Yamashita,Mitsuyoshi Ishida,Akifumi Ogino,Hiroshi Yokoyama

DOI: https://doi.org/10.1080/09593330.2015.1066874

IF: 3.475

2015-07-24

Environmental Technology

Abstract:A floating all-in-one type of microbial fuel cell (Fa-MFC) that allows simple operation and installation in existing wastewater reservoirs for decomposition of organic matter was designed. A prototype cell was constructed by fixing a tubular floater to an assembly composed of a proton-exchange membrane and an air-cathode. To compare anode materials, carbon-cloth anodes or carbon-brush anodes were included in the assembly. The fabricated assemblies were floated in 1-L beakers filled with acetate medium. Both reactors removed acetate at a rate of 133-181 mg/L/d. The Fa-MFC quipped with brush anodes generated a 1.7-fold higher maximum power density (197 mW/m(2)-cathode area) than did that with cloth anodes (119 mW/m(2)-cathode area). To evaluate the performance of the Fa-MFCs on more realistic substrates, artificial wastewater, containing peptone and meat extract, was placed in a 2-L beaker, and the Fa-MFC with brush anodes was floated in the beaker. The Fa-MFC removed the chemical oxygen demand of the wastewater at a rate of 465-1029 mg/L/d, and generated a maximum power density of 152 mW/m(2)-cathode area. When the Fa-MFC was fed with actual livestock wastewater, the biological oxygen demand of the wastewater was removed at a rate of 45-119 mg/L/d, with electricity generation of 95 mW/m(2)-cathode area. Bacteria related to Geobacter sulfurreducens were predominantly detected in the anode biofilm, as deduced from the analysis of the 16S rRNA gene sequence.

environmental sciences
Enhancement of Pollutants Removal from Real Sewage by Embedding Microbial Fuel Cell in Anaerobic–anoxic–oxic Wastewater Treatment Process

Beizhen Xie,Wenbo Dong,Bojie Liu,Hong Liu

DOI: https://doi.org/10.1002/jctb.4138

2013-01-01

Abstract:BACKGROUNDDeveloping an economical biological nitrogen and phosphorus removal technology with high efficiency has become a research priority in current sewage treatment procedures. In order to solve the problems within the anaerobic-anoxic-oxic (A(2)/O) process, including substrates competition and high energy consumption, a microbial fuel cell (MFC) was embedded in the A(2)/O process to enhance the efficiencies of removal of nitrogen and phosphorus, along with electricity production.RESULTSThree A(2)/O reactors, one with an embedded MFC, were set up, and nitrogen and phosphorus removal efficiencies and electricity generation were investigated. At the stage of stable operation, the chemical oxygen demand, total nitrogen and total phosphorus removal efficiencies of the MFC-A(2)/O reactor, compared with the control, were increased by 15.9%, 9.3% and 1.4% on average, respectively. The average output power density of the MFC was 14.31.4 mW m(-3) and the internal resistance was 6000 . Grey relational analysis was applied to study the most significant operational parameter of the A(2)/O process affecting electricity production of the MFC.CONCLUSIONS This research proved that nitrogen and phosphorus removal efficiency could be improved by embedding an MFC in the A(2)/O process. In addition, the MFC-A(2)/O reactor can generate electricity continuously. (c) 2013 Society of Chemical Industry
Trickling Filter in a Biocathode Microbial Fuel Cell for Efficient Wastewater Treatment and Energy Production

Xin Cao,Peng Liang,XinShan Song,YuHui Wang,Yong Qiu,Xia Huang

DOI: https://doi.org/10.1007/s11431-018-9380-0

2019-01-01

Science China Technological Sciences

Abstract:Aiming to reduce the energy input, oxygen supply by trickling filter was employed in a biocathode microbial fuel cell(MFC) to examine its performance of electricity production and sewage treatment. During batch operation, trickling MFC(TMFC) could start and aerate effectively(DO>3.60 mg/L). During continuous operation, TMFC produced a maximum current density of 71.8 A/m 3 and maximum power density of 26.2 W/m 3 under the hydraulic retention time(HRT) of 10 h. By increasing the HRT to 15 h, 90.6% of COD and 99.0% of ammonia in simulated domestic sewage were efficiently removed and the maximum power density was 19.4 W/m 3 . Continuous purification of real municipal wastewater achieved 85.9% of COD removal rate and 91.6%of ammonia removal rate. Sequencing result of biocathodic microorganisms indicated that it consisted of four major classes and the dominant class was γ-proteobacteria, which accounted for up to 84.38%. The dominant genus was Acinetobacter, which accounted for 57.81%. The phylogenetic tree showed different relationships among the 19 species of biocathode microorganisms and the predominant species was Acinetobacter calcoaceticus.
Electricity Generation from Organic Wastewater Using a Continuous-Flow Single Chamber Microbial Fuel Cell

Jiane Zuo,Qian Deng,Longtao Cui,Yujiao Sun,Yan Dang

DOI: https://doi.org/10.1149/1.3036208

2008-01-01

Abstract:A continuous Single Chamber Microbial Fuel Cell (SC-MFC) was investigated systemically in this study. When fed by synthetic wastewater, with a 400mg/l COD concentration the maximum power density of the MFC was 71.5mW/m2 (at 0.8 A/m2). With a NaCl concentration of 0.1M put into the influent, it increased from 42.0 mW/m2 (at 0.25 A/m2) to 141.7mW/m2 (at 1.1A/m2), and the internal resistance also decreased significantly from 300Ω to 77Ω. The optimal operation temperature was 30oC, with a power density of 140.7mW/m2 (at 1.0 A/m2). When fed by starch processing wastewater, the average power density of the MFC was 100mW/m2, while fed by the effluent from an anaerobic reactor treating the starch wastewater; it was 90mW/m2. Different substrates resulted in significant influence on microbial community on the anode of the MFC, while the anode connected into the circuit or not did not cause obvious difference in the microbial community structure.
Microbial fuel cell: Interplay of energy production, wastewater treatment, toxicity assessment with hydraulic retention time

Ana Carla Sorgato,Thamires Custódio Jeremias,Fernanda Leite Lobo,Flávio Rubens Lapolli

DOI: https://doi.org/10.1016/j.envres.2023.116159

2023-08-15

Abstract:Microbial fuel cell (MFC) operation under similar conditions to conventional methods will support the use of this technology in large-scale wastewater treatment. The operation of scaled-up air-cathode MFC (2 L) fed with synthetic wastewater (similar to domestic) in a continuous flow was evaluated using three different hydraulic retention times (HRT), 12, 8, and 4 h. We found that electricity generation and wastewater treatment could be enhanced under an HRT of 12 h. Additionally, the longer HRT led to greater coulombic efficiency (5.44%) than MFC operating under 8 h and 4 h, 2.23 and 1.12%, respectively. However, due to the anaerobic condition, the MFC was unable to remove nutrients. Furthermore, an acute toxicity test with Lactuca sativa revealed that MFC could reduce wastewater toxicity. These outcomes demonstrated that scaled-up MFC could be operated as a primary effluent treatment and transform a wastewater treatment plant (WWTP) into a renewable energy producer.
Optimization of microbial fuel cell performance application to high sulfide industrial wastewater treatment by modulating microbial function

Nattawet Sriwichai,Rutrawee Sangcharoen,Treenut Saithong,David Simpson,Igor Goryanin,Nimaradee Boonapatcharoen,Saowalak Kalapanulak,Pornpan Panichnumsin

DOI: https://doi.org/10.1371/journal.pone.0305673

IF: 3.7

2024-06-19

PLoS ONE

Abstract:Microbial fuel cells (MFCs) are innovative eco-friendly technologies that advance a circular economy by enabling the conversion of both organic and inorganic substances in wastewater to electricity. While conceptually promising, there are lingering questions regarding the performance and stability of MFCs in real industrial settings. To address this research gap, we investigated the influence of specific operational settings, regarding the hydraulic retention time (HRT) and organic loading rate (OLR) on the performance of MFCs used for treating sulfide-rich wastewater from a canned pineapple factory. Experiments were performed at varying hydraulic retention times (2 days and 4 days) during both low and high seasonal production. Through optimization, we achieved a current density generation of 47±15 mA/m 2 , a COD removal efficiency of 91±9%, and a sulfide removal efficiency of 86±10%. Microbiome analysis revealed improved MFC performance when there was a substantial presence of electrogenic bacteria, sulfide-oxidizing bacteria, and methanotrophs, alongside a reduced abundance of sulfate-reducing bacteria and methanogens. In conclusion, we recommend the following operational guidelines for applying MFCs in industrial wastewater treatment: (i) Careful selection of the microbial inoculum, as this step significantly influences the composition of the MFC microbial community and its overall performance. (ii) Initiating MFC operation with an appropriate OLR is essential. This helps in establishing an effective and adaptable microbial community within the MFCs, which can be beneficial when facing variations in OLR due to seasonal production changes. (iii) Identifying and maintaining MFC-supporting microbes, including those identified in this study, should be a priority. Keeping these microbes as an integral part of the system's microbial composition throughout the operation enhances and stabilizes MFC performance.

multidisciplinary sciences
Microbial Fuel Cell Construction Features and Application for Sustainable Wastewater Treatment

Hridoy Roy,Tanzim Ur Rahman,Nishat Tasnim,Jannatul Arju,Yingjie Cai,Vincenzo Naddeo,Md. Mustafa Rafid,Md. Reazul Islam,Md. Nahid Pervez,Md. Shahinoor Islam

DOI: https://doi.org/10.3390/membranes13050490

IF: 4.562

2023-05-01

Membranes

Abstract:A microbial fuel cell (MFC) is a system that can generate electricity by harnessing microorganisms' metabolic activity. MFCs can be used in wastewater treatment plants since they can convert the organic matter in wastewater into electricity while also removing pollutants. The microorganisms in the anode electrode oxidize the organic matter, breaking down pollutants and generating electrons that flow through an electrical circuit to the cathode compartment. This process also generates clean water as a byproduct, which can be reused or released back into the environment. MFCs offer a more energy-efficient alternative to traditional wastewater treatment plants, as they can generate electricity from the organic matter in wastewater, offsetting the energy needs of the treatment plants. The energy requirements of conventional wastewater treatment plants can add to the overall cost of the treatment process and contribute to greenhouse gas emissions. MFCs in wastewater treatment plants can increase sustainability in wastewater treatment processes by increasing energy efficiency and reducing operational cost and greenhouse gas emissions. However, the build-up to the commercial-scale still needs a lot of study, as MFC research is still in its early stages. This study thoroughly describes the principles underlying MFCs, including their fundamental structure and types, construction materials and membrane, working mechanism, and significant process elements influencing their effectiveness in the workplace. The application of this technology in sustainable wastewater treatment, as well as the challenges involved in its widespread adoption, are discussed in this study.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Electricity Generation Performance of Microbial Fuel Cell Embedded in Anaerobic-Anoxic-Oxic Wastewater Treatment Process

Bowei Li,Wenbo Dong,Bojie Liu,Beizhen Xie,Hong Liu

DOI: https://doi.org/10.4236/jbm.2015.39005

2015-01-01

Journal of Biosciences and Medicines

Abstract:Microbial fuel cell (MFC) embedded in anaerobic-anoxic-oxic (A2/O) process has positive effects on wastewater treatment, which can enhance the efficiencies of pollutants’ removal, along with electricity production. But the electricity generation performance and its optimization of MFC embedded in A2O process still needs to be further investigated. In this study, in order to optimize the contaminants removal and electricity production of the MFC-A2/O reactor, a lab-scale corridor-style MFC-A2/O reactor, which could simulate the practical A2/O biological reactor better, was designed and operated. The removal efficiencies of chemical oxygen demand, total nitrogen and total phosphorus were continuously monitored so as the electricity generation. In addition, the influences of the structural parameters’ changes of MFC on the output voltage, including electrode material, the directly connected area and the distance between electrodes, were also studied. The results elucidated that the effluent quality of A2/O reactor could be improved when MFC was embedded, and all the investigated structural factors were closely related to the electricity generation performance of MFC to some extent.
A cooperative microbial fuel cell system for waste treatment and energy recovery

Fei Zhang,Zhen He

DOI: https://doi.org/10.1080/09593330.2013.770540

Abstract:A cooperative microbial fuel cell (MFC) system was developed and investigated for its performance in waste treatment and bioenergy production. The system consisted of a conventional MFC and a dual-cathode MFC that was specially designed for nitrogen removal. Three feeding solutions, including a synthetic solution (acetate as an organic source), digested sludge and landfill leachate, were used as substrates. The MFC system removed more than 99% of chemical oxygen demand (COD) from the synthetic solution, and the organic removal mainly occurred in the anodes of the MFCs. Nitrogen, on the other hand, was removed in the cathodes of the MFC system, which achieved more than 98% removal of ammonium and 96% removal of total nitrogen. The MFC system also effectively treated the actual wastes and removed more than 85% of the total COD and 50-70% of the total nitrogen from the digested sludge and landfill leachate. The organic removal rates with the actual wastes were significantly higher than in other MFC systems. In general, the MFC system consumed less than 0.06 kWh/m3 or 0.1 kWh/kg COD, demonstrating that low energy consumption is a major advantage of MFC technology. The MFC system produced 0.1023 kWh/kg COD from the synthetic solution, much higher than the 0.0097 kWh/kg COD and 0.0019 kWh/kg COD from the actual wastes, resulting in a theoretically positive energy balance with the synthetic solution; however, the net energy with the actual wastes was negative.

Vocal fold furrows. A 10-year review of 240 patients.

Treatment of domestic sewage with anoxic/oxic membrane-less microbial fuel cell with intermittent aeration

Multi-anode enhanced the bioelectricity generation in air-cathode microbial fuel cells towards energy self-sustaining wastewater treatment

Simultaneous removal of organic matter and nitrogen compounds by partitioned aeration in a 226 L-scale microbial fuel cell

Development of a Novel Membrane-less Microbial Fuel Cell (ML-MFC) with a Sandwiched Nitrifying Chamber for Efficient Wastewater Treatment

A Microbial Fuel Cell Producing Electricity Directly from Municipal Wastewater Treatment

Effect of Electricity on Microbial Community of Microbial Fuel Cell Simultaneously Treating Sulfide and Nitrate

Microbial fuel cell performance for aromatic hydrocarbon bioremediation and common effluent treatment plant wastewater treatment with bioelectricity generation through series‐parallel connection

Simultaneous Anaerobic Sulfide and Nitrate Removal in Microbial Fuel Cell

Improved Performance of Microbial Fuel Cells Enriched with Natural Microbial Inocula and Treated by Electrical Current

Performance of a Dual-Chamber Microbial Fuel Cell Inoculated with Active Soil Microbes for Bioelectricity Generation

Evaluation of organic matter removal and electricity generation by using integrated microbial fuel cells for wastewater treatment

Enhancement of Pollutants Removal from Real Sewage by Embedding Microbial Fuel Cell in Anaerobic–anoxic–oxic Wastewater Treatment Process

Trickling Filter in a Biocathode Microbial Fuel Cell for Efficient Wastewater Treatment and Energy Production

Electricity Generation from Organic Wastewater Using a Continuous-Flow Single Chamber Microbial Fuel Cell

Microbial fuel cell: Interplay of energy production, wastewater treatment, toxicity assessment with hydraulic retention time

Optimization of microbial fuel cell performance application to high sulfide industrial wastewater treatment by modulating microbial function

Microbial Fuel Cell Construction Features and Application for Sustainable Wastewater Treatment

Electricity Generation Performance of Microbial Fuel Cell Embedded in Anaerobic-Anoxic-Oxic Wastewater Treatment Process

A cooperative microbial fuel cell system for waste treatment and energy recovery