Abstract:As a viable wastewater treatment and energy recovery technology, microbial fuel cell (MFC) requires more research with regard to the simultaneous achievement of high-quality effluent and high power generation. In this study, a novel flow-through carbon-based composite anode configuration is proposed, which combines the carbon cloth of two-dimensional anode with wooden granular activated carbon of three-dimensional anode. The proposed configuration enhances the performance of power production and chemical oxygen demand degradation by promoting the mass transfer, reducing internal resistance and increasing bioburden. Microbial fuel cell with the composite anode exhibited the highest maximum power density (1300 +/- 50 mW m(-2)) and the highest chemical oxygen demand removal rate constant (0.155 +/- 0.007 h(-1)) compared with the microbial fuel cell using the carbon cloth anode (1136 +/- 46 mW m(-2) and 0.072 +/- 0.008 h(-1)) or the wooden granular activated carbon anode (1045 +/- 32 mW m(-2) and 0.129 +/- 0.009 h(-1)). Meanwhile, at a lower chemical oxygen demand concentration (about 48 mg L-1), the microbial fuel cell with the composite anode maintained a current density of 2.4 A m(-2), which is 18% higher than the wooden granular activated carbon anode (2.04 A m(-2)) and 400% higher than the carbon cloth anode (0.48 A m(-2)). The cyclic voltammetry and electrochemical impedance spectroscopy tests confirmed that the composite anodes displayed better electrochemical performance. Improving the flow rate and reducing the external resistance could effectively enhance the power production and chemical oxygen demand removal performance of microbial fuel cells, while the computational fluid dynamics simulation intuitively demonstrated the positive effect of the composite anode on chemical oxygen demand degradation. These results suggest that the flow-through composite anode provides a feasible strategy to simultaneously enhance the power generation and improve the effluent quality. (C) 2019 Elsevier Ltd. All rights reserved.

Cathodes for microbial fuel cells that improve the removal of copper ions from wastewater concomitant with power generation using the response surface methodology

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

Increasing Efficiencies of Microbial Fuel Cells for Collaborative Treatment of Copper and Organic Wastewater by Designing Reactor and Selecting Operating Parameters

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

High-performance bacterium-enhanced dual-compartment microbial fuel cells for simultaneous treatment of food waste oil and copper-containing wastewater

Combined Carbon Mesh and Small Graphite Fiber Brush Anodes to Enhance and Stabilize Power Generation in Microbial Fuel Cells Treating Domestic Wastewater

A Novel Filtration Composite Anode Configuration of Microbial Fuel Cell for Efficient Wastewater Treatment and Enhanced Power Generation

An Excellent Alternative Composite Modifier for Cathode Catalysts Prepared from Bacterial Cellulose Doped with Cu and P and Its Utilization in Microbial Fuel Cell.

Accelerating treatment of copper-containing wastewater by microbial fuel cells in series

A New Technology of Microbial Fuel Cell for Treating Both Sewage and Wastewater of Heavy Metal

Copper Removal and Microbial Community Analysis in Single-Chamber Microbial Fuel Cell.

Optimized combination of zero-valent iron and oxygen-releasing biochar as cathodes of microbial fuel cells to enhance copper migration in sediment

Modification of carbon based cathode electrode in a batch-type microbial fuel cells

Improving power output in microbial fuel cells with free-standing CoC x /Co@CC composite anodes

Copper removal and microbial community analysis in a single medium sediment microbial fuel cell

Carbon Nanotube/Chitosan Nanocomposite As A Biocompatible Biocathode Material to Enhance the Electricity Generation of A Microbial Fuel Cell

ZIF-8-derived Cu, N Co-Doped Carbon As a Bifunctional Cathode Catalyst for Enhanced Performance of Microbial Fuel Cell.

Enhanced copper-containing wastewater treatment with MnO2/CNTs modified anode microbial fuel cell

Optimization and Simulation of a Carbon-Based Flow-Through Composite Anode Configuration to Enhance Power Generation and Improve Effluent Quality Simultaneously for Microbial Fuel Cells

[Utilization of Copper (Ⅱ) Wastewater for Enhancing the Treatment of Chromium (Ⅵ) Wastewater in Microbial Fuel Cells].

Enhanced copper removal and bioelectricity generation in sediment microbial fuel cells through biostimulation and bioaugmentation