Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

Enhanced copper-containing wastewater treatment with MnO2/CNTs modified anode microbial fuel cell

Enhanced performance of a microbial fuel cell using CNT/MnO2 nanocomposite as a bioanode material.

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

CNFs@MnO2 nanofiber as anode for improving extracellular electron transfer of microbial fuel cells

Application of Surface-modified Carbon Nanotubes Powder in Microbial Fuel Cell

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

Enhanced power generation of microbial fuel cell using manganese dioxide-coated anode in flow-through mode

Carbon nanotube supported MnO₂ catalysts for oxygen reduction reaction and their applications in microbial fuel cells

Porous α-Fe2O3 nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Modifying Ti3C2 MXene with NH4+ As an Excellent Anode Material for Improving the Performance of Microbial Fuel Cells.

Bimetallic oxide MnFe2O4 modified carbon felt anode by drip coating: an effective approach enhancing power generation performance of microbial fuel cell

Nano-structured Manganese Oxide As a Cathodic Catalyst for Enhanced Oxygen Reduction in a Microbial Fuel Cell Fed with a Synthetic Wastewater.

Enhanced Performance of Microbial Fuel Cell with a Bacteria/multi-Walled Carbon Nanotube Hybrid Biofilm

Porous -Fe<sub>2</sub>O<sub>3</sub> nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Ti3C2 MXene as an excellent anode material for high performance microbial fuel cells

Nitrogen-doped graphene oxide with enhanced bioelectricity generation from microbial fuel cells for marine sewage treatment

Bimetallic hybrids modified with carbon nanotubes as cathode catalysts for microbial fuel cell: Effective oxygen reduction catalysis and inhibition of biofilm formation

Binder-free graphene and manganese oxide coated carbon felt anode for high-performance microbial fuel cell

Biochar-supported Fe3C Nanoparticles with Enhanced Interfacial Contact As High-Performance Binder-Free Anode Material for Microbial Fuel Cells

Enhanced microorganism attachment and flavin excretion in microbial fuel cells via an N,S-codoped carbon microflower anode