Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

Modifying Ti3C2 MXene with NH4+ As an Excellent Anode Material for Improving the Performance of Microbial Fuel Cells.

TiO2 Nanotube Arrays Modified Titanium: A Stable, Scalable, and Cost-Effective Bioanode for Microbial Fuel Cells

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

Electrostatic self-assembled nickel cobalt sulfide/Ti 3 C 2 Mxene as a bio-capacitive anode for specific attracting sulfur-cycling bacteria and regulating extracellular electron transfer efficiency

Enhanced performance of a microbial fuel cell using CNT/MnO2 nanocomposite as a bioanode material.

2D layered structure-supported imidazole-based metal-organic framework for enhancing the power generation performance of microbial fuel cells

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

A novel layer-by-layer self-assembled carbon nanotube-based anode: Preparation, characterization, and application in microbial fuel cell

Boosting power output in microbial fuel cell with sulfur-doped MXene/polypyrrole hydrogel anode for enhanced extracellular electron transfer process

Fabrication of a Molybdenum Dioxide/Multi-Walled Carbon Nanotubes Nanocomposite as an Anodic Modification Material for High-Performance Microbial Fuel Cells

Modification of the anodes using MoS2 nanoflowers for improving microbial fuel cells performance

Enhanced copper-containing wastewater treatment with MnO2/CNTs modified anode microbial fuel cell

Nano-hydroxyapatite/Carbon nanotube: an excellent anode modifying material for improving the power output and diclofenac sodium removal of microbial fuel cells

Bifunctional electrode materials: Enhancing microbial fuel cell efficiency with 3D hierarchical porous Fe3O4/Fe-N-C structures

Investigating the effect of anode materials on the performance and microbial community in an integrated chamber-free microbial fuel cell

A CoFe2O4/Nb2C-MXene-Modified Anode Improved the Performance Characteristics of a Microbial Fuel Cell in Terms of Bioelectricity Generation and Water Treatment

Lysine-modified TiO2 Nanotube Array for Optimizing Bioelectricity Generation in Microbial Fuel Cells

Firmly coating carbon nanoparticles onto titanium as high performance anodes in microbial fuel cells

Stainless steel cloth modified by carbon nanoparticles of Chinese ink as scalable and high-performance anode in microbial fuel cell

Enhancing direct electron transfer process and power generation in microbial fuel cell using anode of molybdenum-based ternary material

Heteroatom-doped porous carbon nanoparticle-decorated carbon cloth (HPCN/CC) as efficient anode electrode for microbial fuel cells (MFCs)