Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

Application of Surface-modified Carbon Nanotubes Powder in Microbial Fuel Cell

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.

Carbon nanotubes simultaneously as the anode and microbial carrier for up-flow fixed-bed microbial fuel cell

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

High‐Performance Carbon Anode Derived from Sugarcane for Packed Microbial Fuel Cells

Enhancing Bioelectricity Generation from Wastewater in Microbial Fuel Cells Using Carbon Nanomaterials

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

Carbon Nanotube/Chitosan Nanocomposite As A Biocompatible Biocathode Material to Enhance the Electricity Generation of A Microbial Fuel Cell

Enhanced copper-containing wastewater treatment with MnO2/CNTs modified anode microbial fuel cell

High-Power Microbial Fuel Cells Based on a Carbon-Carbon Composite Air Cathode.

Activated nitrogen-doped ordered porous carbon as advanced anode for high-performance microbial fuel cells

Improving Microbial Fuel Cell Performance Using Porous Capacitive Composite Bioanode Materials with Energy Storage Function

Enhanced performance of a microbial fuel cell using CNT/MnO2 nanocomposite as a bioanode material.

A novel layer-by-layer self-assembled carbon nanotube-based anode: Preparation, characterization, and application in microbial fuel cell

Enhanced electricity generation and storage by nitrogen-doped hierarchically porous carbon modification of the capacitive bioanode in microbial fuel cells

Enhanced electricity production from microbial fuel cells with plasma-modified carbon paper anode.

Enhancing extracellular electron transfer through selective enrichment of Geobacter with Fe@CN-modified carbon-based anode in microbial fuel cells

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

Electricity generation by the microbial fuel cells using carbon nanotube as the anode

Enhanced performance of acridine degradation and power generation by microbial fuel cell with g-C3N4/PANI-DA/CF anode

Facilely Prepared Carbon Dots as Effective Anode Modifier for Enhanced Performance of Microbial Fuel Cells