Abstract:Sediments play an important role in determining the quality of lakes, rivers and oceans as they can act as either a source or sink for pollutants. Once the input pollution is controlled, sediments as a secondary source of pollution can release the accumulated pollutants to overlying water.1 The organic matter content of sediments can also affect the structure of macroinvertebrate assemblages.2 To date, traditional sediments remediation methods include monitored natural recovery, in-situ treatment, and ex-situ treatment.3 The traditional methods are either expensive or not environmentally friendly, so it is crucial to find a cost-effective and environmentally friendly way to solve the contaminated sediments problem. Microbial fuel cell (MFC) technology is considered an environmentally friendly and promising approach for converting wastewater or solid waste into electricity.4–6 Recently, some studies have shown that sediment microbial fuel cell (SMFC) can alter the properties and enhance the removal of organic matter in sediment.7–9 Wang9 developed a three-dimensional floating biocathode to dispose river sediments, and concluded that the sediment organic matter content near the anode was removed by 29 %. Hong7 found that sediment organic matter around the electrodes became more humified, aromatic, and polydispersed, and had a higher average molecular weight, along with its partial degradation and electricity generation compared to that of the original sediment. Sajana10 studied the performance of SMFC by adding cellulose in freshwater and demonstrated effective cellulose degradation from aquaculture pond sediment and maintained the oxidized sediment top layer favourable for aquaculture. Zhou11 improved the SMFC performance by amendment of colloidal iron oxyhydroxide into sediments and concluded that high Fe(II) concentration in pore water of sediments led to high power production. Song12 found that the addition of biomass in appropriate proportions can enhance output power in SMFC. However, mass transfer limitations for electron donors to reach the anode and a low rate of oxygen reduction in cathodes were major limitations for power production.13 In freshwater environments, the maximum power densities in SMFC with felt graphite14 and carbon paper15 as cathode were 4 mW m–2 and 2 mW m–2 respectively. Song13 constructed SMFC with granule activated carbon cathode and stainless steel anode and obtained 3.5 mW m–2 maximum power density, and further increased to 11.2 mW m–2 by adding cellulose. Jiang16 built MFC with graphite fiber brush and enhanced TCOD removal rate from 11.3 % to 19.2 % for raw sludge. Removal and Changes of Sediment Organic Matter and Electricity Generation by Sediment Microbial Fuel Cells and Amorphous Ferric Hydroxide

Optimized combination of zero-valent iron and oxygen-releasing biochar as cathodes of microbial fuel cells to enhance copper migration in sediment

Sewage Sludge-Derived Carbon-Doped Manganese As Efficient Cathode Catalysts in Microbial Fuel Cells

Enhanced copper removal and bioelectricity generation in sediment microbial fuel cells through biostimulation and bioaugmentation

Copper removal and microbial community analysis in a single medium sediment microbial fuel cell

Sediment microbial fuel cell with biochar-modified cathode for remediation of black-odorous water sediments and analysis of microbial community

Cathodes for microbial fuel cells that improve the removal of copper ions from wastewater concomitant with power generation using the response surface methodology

Promoting removal of copper from sediment and production of bioelectricity by sediment microbial fuel cells using tea extracts

Enhancing bioelectricity production and copper remediation in constructed single-medium plant sediment microbial fuel cells

Removal and Changes of Sediment Organic Matter and Electricity Generation by Sediment Microbial Fuel Cells and Amorphous Ferric Hydroxide

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

MnO2/tourmaline Composites As Efficient Cathodic Catalysts Enhance Bioelectroremediation of Contaminated River Sediment and Shape Biofilm Microbiomes in Sediment Microbial Fuel Cells

New Process for Copper Migration by Bioelectricity Generation in Soil Microbial Fuel Cells.

A co-doped oxygen reduction catalyst with FeCu promotes the stability of microbial fuel cells

Sediment Microbial Fuel Cell with Floating Biocathode for Organic Removal and Energy Recovery

ZIF-8-derived Cu, N Co-Doped Carbon As a Bifunctional Cathode Catalyst for Enhanced Performance of Microbial Fuel Cell.

Copper Removal and Microbial Community Analysis in Single-Chamber Microbial Fuel Cell.

Ameliorating Cu2+ reduction in microbial fuel cell with Z-scheme BiFeO3 decorated on flower-like ZnO composite photocathode

Electrodeposited copper enhanced removal of 2,4-dichlorophenol in batch and flow reaction in Cu@CC-PS-MFC system

Anode modification of sediment microbial fuel cells (SMFC) towards bioremediating mariculture wastewater

A Loop of Catholyte Effluent Feeding to Bioanodes for Complete Recovery of Sn, Fe, and Cu with Simultaneous Treatment of the Co-Present Organics in Microbial Fuel Cells.

Biodegradation of Organic Matter and Anodic Microbial Communities Analysis in Sediment Microbial Fuel Cells With/without Fe(III) Oxide Addition.