Abstract:Sediments play an important role in determining the quality of lakes, rivers and oceans as they can act as either a source or sink for pollutants. Once the input pollution is controlled, sediments as a secondary source of pollution can release the accumulated pollutants to overlying water.1 The organic matter content of sediments can also affect the structure of macroinvertebrate assemblages.2 To date, traditional sediments remediation methods include monitored natural recovery, in-situ treatment, and ex-situ treatment.3 The traditional methods are either expensive or not environmentally friendly, so it is crucial to find a cost-effective and environmentally friendly way to solve the contaminated sediments problem. Microbial fuel cell (MFC) technology is considered an environmentally friendly and promising approach for converting wastewater or solid waste into electricity.4–6 Recently, some studies have shown that sediment microbial fuel cell (SMFC) can alter the properties and enhance the removal of organic matter in sediment.7–9 Wang9 developed a three-dimensional floating biocathode to dispose river sediments, and concluded that the sediment organic matter content near the anode was removed by 29 %. Hong7 found that sediment organic matter around the electrodes became more humified, aromatic, and polydispersed, and had a higher average molecular weight, along with its partial degradation and electricity generation compared to that of the original sediment. Sajana10 studied the performance of SMFC by adding cellulose in freshwater and demonstrated effective cellulose degradation from aquaculture pond sediment and maintained the oxidized sediment top layer favourable for aquaculture. Zhou11 improved the SMFC performance by amendment of colloidal iron oxyhydroxide into sediments and concluded that high Fe(II) concentration in pore water of sediments led to high power production. Song12 found that the addition of biomass in appropriate proportions can enhance output power in SMFC. However, mass transfer limitations for electron donors to reach the anode and a low rate of oxygen reduction in cathodes were major limitations for power production.13 In freshwater environments, the maximum power densities in SMFC with felt graphite14 and carbon paper15 as cathode were 4 mW m–2 and 2 mW m–2 respectively. Song13 constructed SMFC with granule activated carbon cathode and stainless steel anode and obtained 3.5 mW m–2 maximum power density, and further increased to 11.2 mW m–2 by adding cellulose. Jiang16 built MFC with graphite fiber brush and enhanced TCOD removal rate from 11.3 % to 19.2 % for raw sludge. Removal and Changes of Sediment Organic Matter and Electricity Generation by Sediment Microbial Fuel Cells and Amorphous Ferric Hydroxide

Biodegradation of Organic Matter and Anodic Microbial Communities Analysis in Sediment Microbial Fuel Cells With/without Fe(III) Oxide Addition.

Sediment microbial fuel cell with biochar-modified cathode for remediation of black-odorous water sediments and analysis of microbial community

Sediment Microbial Fuel Cell with Floating Biocathode for Organic Removal and Energy Recovery

Removal and Changes of Sediment Organic Matter and Electricity Generation by Sediment Microbial Fuel Cells and Amorphous Ferric Hydroxide

Anode modification of sediment microbial fuel cells (SMFC) towards bioremediating mariculture wastewater

Improvement of Power Density and COD Removal in a Sediment Microbial Fuel Cell with α-FeOOH Nanoparticles

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode

Copper removal and microbial community analysis in a single medium sediment microbial fuel cell

Microbial Community Dynamic Shifts Associated with Sulfamethoxazole Degradation in Microbial Fuel Cells.

Microbe-Assisted Sulfide Oxidation in the Anode of a Microbial Fuel Cell

Enhancement of gaseous o-xylene degradation in a microbial fuel cell by adding Shewanella oneidensis MR-1

Transitional bimetallic heterostructure catalyst modified anode for microbial fuel cell treatment of high-intensity wastewater

Response of the Microbial Community Structure of Biofilms to Ferric Iron in Microbial Fuel Cells

Enhanced copper removal and bioelectricity generation in sediment microbial fuel cells through biostimulation and bioaugmentation

Simultaneous Removal of Heavy Metals and Biodegradation of Organic Matter with Sediment Microbial Fuel Cells

Efficient biodechlorination at the Fe3O4-based silicone powder modified chlorobenzene-affinity anode

Effects of anode materials on the performance and anode microbial community of soil microbial fuel cell

Anode biofilm communities and the performance of microbial fuel cells with different reactor configurations

Enhanced Shewanella Oneidensis MR-1 Anode Performance by Adding Fumarate in Microbial Fuel Cell

Effect of treatment on electron transfer mechanism in microbial fuel cell

Surface Modification for Enhanced Biofilm Formation and Electron Transport in Shewanella Anodes