Abstract:The increasing global water pollution leads to the need for urgent development of rapid and accurate water quality monitoring methods. Microbial fuel cells (MFCs) have emerged as real-time biosensors for biochemical oxygen demand (BOD), but they grapple with several challenges, including issues related to reproducibility, operational stability, and cost-effectiveness. These challenges are substantially shaped by the selection of an appropriate air-breathing cathode. Previous studies indicated a critical influence of the cathode on both the enduring electrochemical performance of MFCs and the taxonomic diversity at the electroactive anode. However, the effect of different gas diffusion electrodes (GDE) on 3D-printed single-chamber MFCs for BOD biosensing application and its effect on the bioelectroactive anode was not investigated before. Our study focuses on comparing GDE cathode materials to enhance MFC performance for precise and rapid BOD analysis in wastewater. We examined for over 120 days two Pt-coated air-breathing cathodes with distinct carbonaceous gas diffusion layers (GDLs) and catalyst layers (CLs): cost-effective carbon paper (CP) with hand-coated CL and more expensive woven carbon cloth (CC) with CL pre-applied by the supplier. The results show significant differences in electrochemical characteristics and anodic biofilm composition between MFCs with CP and CC GDE cathodes. CP-MFCs exhibited lower sensitivity (16.6 C L mg−1 m−2) and a narrower dynamic range (25 to 600 mg L−1), attributed to biofouling-related degradation of the GDE. In contrast, CC-MFCs demonstrated superior performance with higher sensitivity (37.6 C L mg−1 m−2) and a broader dynamic range (25 to 800 mg L−1). In conclusion, our study underscores the pivotal role of cathode selection in 3D-printed MFC biosensors, influencing anodic biofilm enrichment time and overall BOD assessment performance. We recommend the use of cost-effective CP GDL with hand-coated CL for short-term MFC biosensor applications, while advocating for CC GDL supplied with CL as the preferred choice for long-term sensing implementations with enduring reliability.

An innovative fast-start aerobic anode microbial fuel cell biosensor for copper ion detection

A dual chamber microbial fuel cell based biosensor for monitoring copper and arsenic in municipal wastewater

Development of miniature self-powered single-chamber microbial fuel cell and its response mechanism to copper ions in high and trace concentration

Sensing Copper and Ferricyanide Ions in Wastewater Using a Membrane-Less, Easy-to-Use Soil Microbial Fuel Cell-Based Sensor

A Novel Microbial Fuel Cell Sensor with Biocathode Sensing Element.

Microbial fuel cell (MFC)-based biosensor for combined heavy metals monitoring and associated bioelectrochemical process

Removal of copper from aqueous solution by electrodeposition in cathode chamber of microbial fuel cell

A Cathode-Shared Microbial Fuel Cell Sensor Array for Water Alert System

Visual detection of the toxicity of wastewater containing heavy metal ions using a microbial fuel cell biosensor with a Prussian blue cathode

Soil Microbial Fuel Cell Based Self-Powered Cathodic Biosensor for Sensitive Detection of Heavy Metals

Microbial fuel cell based biosensor for in situ monitoring of anaerobic digestion process.

The Evaluation of Long Term Performance of Microbial Fuel Cell Based Pb Toxicity Shock Sensor.

Impact of Air-Cathodes on Operational Stability of Single-Chamber Microbial Fuel Cell Biosensors for Wastewater Monitoring

Cathodes for microbial fuel cells that improve the removal of copper ions from wastewater concomitant with power generation using the response surface methodology

Microbial fuel cell sensors for water quality early warning systems: Fundamentals, signal resolution, optimization and future challenges

Copper removal and microbial community analysis in a single medium sediment microbial fuel cell

Enhanced copper removal and bioelectricity generation in sediment microbial fuel cells through biostimulation and bioaugmentation

Effect of CuO/ZnO/FTO electrode properties on the performance of a photo-microbial fuel cell sensor for the detection of heavy metals

Increasing Efficiencies of Microbial Fuel Cells for Collaborative Treatment of Copper and Organic Wastewater by Designing Reactor and Selecting Operating Parameters

Measurement of biochemical oxygen demand from different wastewater samples using a mediator-less microbial fuel cell biosensor

Microbial Fuel Cell Biosensor with Capillary Carbon Source Delivery for Real-Time Toxicity Detection