Abstract:Greatly enhanced hole collection of MoO x is demonstrated experimentally with a top sub-10 nm thick Ag film, allowing for an efficient dopant-free contacted crystalline silicon (c-Si) heterojunction solar cell without a front grid electrode. With the removal of shadows induced by the front grid electrode, the gridless solar cell with the MoO x /Ag hole-selective contact (HSC) shows an increment of ∼8% in its power conversion efficiency (PCE) due to the greatly improved short-circuit current density ( J sc ) as well as the almost undiminished fill factor (FF) and open-circuit voltage ( V oc ), while the gridless solar cells with the conventional MoO x /ITO and pure MoO x HSCs exhibit ∼20% and ∼43% degradations in PCE due to the overwhelming decrease in their FF and J sc , respectively. Through systematic characterizations and analyses, it is found that the ultrathin Ag film (more conductive than ITO) provides an additional channel for photogenerated holes to transport on MoO x , contributing to the great enhancement in the hole collection and the great suppression of the shunt loss in the gridless solar cells. A 50 μm thick gridless c-Si heterojunction solar cell with the MoO x /Ag HSC is 75% thinner but is 86% efficient compared to its 200 μm thick counterpart (while the 50 μm thick gridless solar cell with the MoO x /ITO HSC is much less efficient). It is over 82% efficient after being bent to a curvature radius as small as 4 mm, also showing superior mechanical flexibility to its counterpart with the MoO x /ITO HSC. Our MoO x /Ag double-layer HSC can be easily fabricated through thermal evaporation without breaking the vacuum, saving both the time and cost of the fabrication of the whole device. Therefore, this work provides a guide for the design of efficient HSCs for high-efficiency, low-cost, and flexible solar cells.

Greatly enhanced hole collection of MoOx with top sub-10 nm thick silver films for gridless and flexible crystalline silicon heterojunction solar cells

50-Μm Thick Flexible Dopant-Free Interdigitated-Back-contact Silicon Heterojunction Solar Cells with Front MoOx Coatings for Efficient Antireflection and Passivation.

Highly Efficient and Highly Flexible Thin Crystalline Silicon Heterojunction Solar Cells Based on Dopant-Free Carrier-Selective Contacts Fabricated with Simple Processes

MoOx Hole Collection Layer for A-Si: H Based Photovoltaic Cells

< 50-μm thin crystalline silicon heterojunction solar cells with dopant-free carrier-selective contacts

Low Oxygen Content MoOx and SiOx Tunnel Layer Based Heterocontacts for Efficient and Stable Crystalline Silicon Solar Cells Approaching 22% Efficiency

Molybdenum oxide hole selective transport layer by hot wire oxidation-sublimation deposition for silicon heterojunction solar cells

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

Efficient Hole Transport Layers for Silicon Heterojunction Solar Cells by Surface Plasmonic Modification in MoOx/Au NPs/MoOx Stacks

Large‐area MoOx/c‐Si heterojunction solar cells with a ICO/Ag back reflector

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Atomic-Layer-Deposited H:MoO x Function Layer as Efficient Hole Selective Passivating Contact in Silicon Solar Cells

Crystalline Silicon Heterojunction Solar Cells with Metal Oxide Window Layers

Simulation of High Efficiency Silicon Heterojunction Solar Cells with Molybdenum Oxide Carrier Selective Layer

Heterojunction solar cells with asymmetrically carrier-selective contact structure of molybdenum-oxide/silicon/magnesium-oxide

Modulation of the TCO/MoO x Front Contact Enables >21% High-Efficiency Dopant-Free Silicon Solar Cells

Chromium Trioxide Hole-Selective Heterocontacts for Silicon Solar Cells

Large-Area Si Solar Cells Based on Molybdenum Oxide Hole Selective Contacts

Enhancing performance of heterojunction silicon solar cells through atomic-layer-deposited MoO x hole contact and atomic-layer-deposited AlZnO layer

Asymmetric TMO–Metal–TMO Structure for Enhanced Efficiency and Long-Term Stability of Si-Based Heterojunction Solar Cells

12.42% Monolithic 25.42 cm 2 Flexible Organic Solar Cells Enabled by an Amorphous ITO‐Modified Metal Grid Electrode