Abstract:Herein, in situ formed MgCuSb nanoprecipitates are homogeneously distributed in the MgAgSb matrix to optimize power factor with the effect of carrier injection. As a result, a record‐high average power factor PFave of 27.2 μW cm−1 K−2 is obtained in MgCu0.1Ag0.87Sb0.99 composite and a record output power density of 2.9 W cm−2 is achieved for an eight‐pair Mg‐based TE module. Sustained thermoelectric efforts have concentrated on the enhancement of conversion efficiency of power generators, while simultaneously achieving high output power continues to lag. Specifically, the highest output power density of emerging Mg‐based modules reported so far is only half of that of commercial Bi2Te3‐based, mainly due to the low power factor of MgAgSb. Herein, homogenously distributed MgCuSb in situ nanoprecipitates in the MgAgSb matrix effectively optimized carrier concentration due to the effect of carrier injection from the metal–semiconductor Ohmic contact. As a result, a record‐high average power factor of 27.2 μW cm−1 K−2 is obtained in MgCu0.1Ag0.87Sb0.99 composite within the temperature range of 300–550 K, which is much higher than ever reported values of MgAgSb system. Benefiting from the combination of the optimized average power factor of p‐leg and low interface resistivity, a fabricated eight‐pair MgCu0.1Ag0.87Sb0.99/Mg3.2Bi1.5Sb0.5 module demonstrates an unprecedently high output power density of 2.9 W cm−2 under a temperature difference of 300 K, outperforming all low‐temperature advanced thermoelectric modules. Meanwhile, a competitive conversion efficiency of 7.65% is obtained simultaneously. The work significantly advances high‐power thermoelectric applications of Mg‐based modules in the field of low‐temperature sustainable energy harvesting.

Realizing an excellent conversion efficiency of 14.5% in the Mg 3 Sb 2 /GeTe-based thermoelectric module for waste heat recovery

Realizing an Excellent Conversion Efficiency of 14.5% in the Mg3Sb2/GeTe-based Thermoelectric Module for Waste Heat Recovery

A high-efficiency GeTe-based thermoelectric module for low-grade heat recovery

Realizing High Energy Conversion Efficiency in a Novel Segmented‐Mg3(Sb, Bi)2/Cubic‐GeTe Thermoelectric Module for Power Generation

Lead-free and scalable GeTe-based thermoelectric module with an efficiency of 12%

All‐Mg3Sb2‐Based Module for Thermoelectric Power Generation

Realizing a Superior Conversion Efficiency of ≈11.3% in the Group IV-VI Thermoelectric Module

High‐Efficiency Thermoelectric Module Based on High‐Performance Bi0.42Sb1.58Te3 Materials

Interfacial Design Contributing to High Conversion Efficiency in Mg3(Sb, Bi)2/Bi2Te3 Thermoelectric Module with Superior Stability

Realizing Ultrahigh Conversion Efficiency of ≈9.0% in YbCd2Sb2/Mg3Sb2 Zintl Module for Thermoelectric Power Generation

A record thermoelectric efficiency in tellurium-free modules for low-grade waste heat recovery

Design and Fabrication of Segmented GeTe/(Bi,Sb)2Te3 Thermoelectric Module with Enhanced Conversion Efficiency

High efficiency GeTe-based materials and modules for thermoelectric power generation

High Performance Dual-mode Module for Power Generation and Cooling Based on Optimized BiSbTe

Bi2Te3-Based Thermoelectric Modules for Efficient and Reliable Low-Grade Heat Recovery

Interface and Surface Engineering Realized High Efficiency of 13% and Improved Thermal Stability in Mg3Sb1.5Bi0.5‐Based Thermoelectric Generation Devices

Modifying Roles of CuSbSe2 in Realizing High Thermoelectric Performance of GeTe

Realizing a 14% single-leg thermoelectric efficiency in GeTe alloys

High Performance Thermoelectric Power of Bi 0.5 Sb 1.5 Te 3 Through Synergistic Cu 2 GeSe 3 and Se Incorporations

Realizing High Conversion Efficiency in Shallow Cryogenic Thermoelectric Module Based on N-Type BiSb and P-Type MgAgSb Materials

Semiconductor–Semimetal Composite Engineering Enabling Record‐High Thermoelectric Power Density for Low‐Temperature Energy Harvesting