Abstract:3D monolithic integration of logic and memory devices has emerged as one of the key enablers for next-generation electronic devices to address the ever-increasing demand for higher integration density, better performance and energy efficiency. BEOL-compatible oxide semiconductors show great potential to revolutionize the field thanks to their unique properties [1]. We present our recent advancement related to BEOL-compatible oxide semiconductors for logic and memory applications. The digital-etch-enabled nanowire transistors and α -IGZO-based eDRAM will first be discussed, followed by the ferroelectric (FE) memories with high performance and novel structures utilizing α -IGZO or ALD-deposited ZnO as the channel. Ultra-scaled amorphous IGZO ( α -IGZO) nanowire field-effect transistors (NW-FETs) hold great potential for applications demanding high performance and integration density. To realize the fabrication of high-quality and aggressively-scaled nanowire structures, a novel digital etching method for amorphous α -IGZO materials has been proposed and demonstrated [2]. Confirmed by the SEM images of an α -IGZO nanowire before and after digital etching, a notable nanowire width W NW reduction can be observed. We have the thinnest α -IGZO nanowire achieved by the digital etching with a W NW of approximately 20 nm. By further developing the transistor upon the nanowire, the α -IGZO NW-FET attains a good subthreshold swing (SS) of 80 mV/decade and a high peak extrinsic transconductance ( G m, ext ) of 612 μS/μm at V DS of 2 V (456 μS/μm at V DS = 1 V). Compared to the previous studies, our IGZO NW-FET achieves one of the highest peak G m values among all IGZO-based FETs. Besides the BEOL compatibility and high on-current, ultra-low subthreshold leakage makes α -IGZO FETs extremely promising for eDRAM. We further investigated the potential of α -IGZO eDRAM by developing the charge-domain compute-in-memory (CiM) [3]. Experiments have demonstrated small SS, large on-state current, and long-time charge retention with our dedicated 4T1C memory cell. With differential cell structure, an even higher tolerance for charge loss can be attained. With experiment-calibrated benchmarking in the VGG-8 network for CIFAR-10 image classification tasks, 2092 TOPS/W power efficiency for the CiM core can be expected, outperforming the prior TFT and CMOS-based CiM approaches, exhibiting significant advantages for ultra-low-power applications. The integration of doped-HfO 2 FE material and oxide semiconductor, both BEOL-compatible with large-scale and cost-effective deposition, presents a promising avenue for advancing data storage in the future. We have developed the high-performance α -IGZO Fe-FET with a metal-ferroelectric-metal-oxide-semiconductor (MFMIS) structure as well as the Fe TCAM [4]. The α -IGZO Fe-FET achieves a large memory window of ~3 V with high reliability, while the Fe TCAM reduces the transistor number from 16 to 2 compared to the traditional SRAM-based one. Besides α -IGZO, we believe that ALD-based oxide semiconductors featuring high controllability of film thickness and conformal coverage of the 3D structures can create new opportunities for novel device structure and integration. The fin-gate ZnO Fe-FET stands for a great example while not only outstanding device performance but also suppressed device-to-device variation due to the unique structure have been demonstrated, holding tremendous promise for high-density 3D integration [5]. Acknowledgments: This work is supported by Singapore Ministry of Education (Tier 2: MOE2018-T2-2-154, Tier 1: R-263-000-D65-114). References : [1] S. Dutta et al. , IEDM, p. 36.4., 2020. [2] K. Han et al. , VLSI , 2021, p. T10-1. [3] J. Liu et al. , IEDM , 2021, p. 46.2. [4] C. Sun et al. , VLSI , 2021, p. T7-4. [5] Q. Kong et al. , IEDM , 2022, p. 12.3.

A BEOL Compatible, 2-Terminals, Ferroelectric Analog Non-Volatile Memory

A Back-End-Of-Line Compatible, Ferroelectric Analog Non-Volatile Memory

Low Operation Voltage, High-Temperature Reliable, and High-Yield BEOL Integrated Hf$_{\text{0}.\text{5}}$Zr$_{\text{0}.\text{5}}$O$_{\text{2}}$ Ferroelectric Memory Arrays

Low Operation Voltage, High-Temperature Reliable, and High-Yield BEOL Integrated Hf0.5Zr0.5O2 Ferroelectric Memory Arrays

A back-end, CMOS compatible ferroelectric Field Effect Transistor for synaptic weights

High-Conductance, Ohmic-like HfZrO$_4$ Ferroelectric Memristor

Epitaxial Integration of Tetragonal Bifeo3 with Silicon for Nonvolatile Memory Applications

Logic Compatible High-Performance Ferroelectric Transistor Memory

Ferroelectric Hf0.5Zr0.5O2 for Analog Memory and In‐Memory Computing Applications Down to Deep Cryogenic Temperatures

Nonvolatile Ferroelectric Field-Effect Transistors.

Flexible Quasi‐van der Waals Ferroelectric Hafnium‐Based Oxide for Integrated High‐Performance Nonvolatile Memory

ZrO 2 Ferroelectric FET for Non-volatile Memory Application

Low Voltage Operating 2D MoS2 Ferroelectric Memory Transistor with Hf1-xZrxO2 Gate Structure.

Multipeak Coercive Electric-Field-Based Multilevel Cell Nonvolatile Memory With Antiferroelectric-Ferroelectric Field-Effect Transistors (FETs)

Tunable Multi‐Bit Nonvolatile Memory Based on Ferroelectric Field‐Effect Transistors

Nonvolatile memory cells from hafnium zirconium oxide ferroelectric tunnel junctions using Nb and NbN electrodes

Back‐End‐of‐Line Integration of Synaptic Weights using HfO2/ZrO2 Nanolaminates

Hafnium Oxide‐Based Ferroelectric Devices for Computing‐in‐Memory Applications

(Invited) BEOL-Compatible Oxide Semiconductor Logic and Memory Devices

Engineering Hf 0.5 Zr 0.5 O 2 Ferroelectric Tunnel Junctions With Amorphous WO x Bottom Electrodes Achieving High Remanent Polarization and Record Low-Operating Voltage

CMOS-compatible Hf 0.5 Zr 0.5 O 2 -based ferroelectric memory crosspoints fabricated with damascene process