Abstract:Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a> and 0.02 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>) in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times (5 to 25 min). The irradiation has been achieved using laser beam of 2W power and 810 nm wavelength. We have studied the morphological and structural properties of PSi layers using the techniques of Xray Diffraction (XRD) and Scanning Electron Microscopy (SEM) and Gravimetric method. The Xray Diffraction data shows that the structure aspect of PSi layers remains crystalline as well as the decreasing of diffraction angle (thetaB) of Xray from PSi layers (29 to 26 degree) and increasing of the lattice parameter values of PSi structures with increasing of etching times from 5 to 25 min., and the resistivity of silicon substrates from 0.02 to 3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>. The nanocrystallite size is decreasing from (20.72 to 5.13 nm) with increasing of etching times, and the resistivity of silicon substrates. The SEM images shows that the values of pore width and PSi layer thickness increases from (0.5 to 6.25 micrometer) and (6.7 to 47 micrometer) respectively with increasing of etching times and silicon substrates resistivities, while the values of the thickness of walls between pores has been varied from (1.25 to 0.03 micrometer) with increasing of etching times and silicon substrates resistivities. The pore shape of pores has been varied from Cylindrical to Rectangular and to Starful with varied of etching conditions. Further the measured specific surface area of PSi layers has been increased from (7.43 to 235.35 m2/cm3) with increasing of etching times and silicon substrates resistivities.

Thermophysical Characteristics of the Porous Silicon Samples Formed by Electrochemical, Chemical and Combined Etching Methods

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Al-assisted Anodic Etched Porous Silicon

Thermoelectrical properties of silicon substrates with nanopores synthesized by metal-assisted chemical etching

Preparation Of Porous Silicon By Electrochemical Etching Methods And Its Morphological And Optical Properties

Structural, Morphological and Electrical Properties of Porous Silicon Prepared Under Laser Illumination

Study of Optical Properties of Porous Silicon Produced by Metal-Aid

Long-time Stability of the Enhanced Porous Silicon Opto-electrical Properties by Samarium Pore-filling

Temperature: A Critical Parameter Affecting The Optical Properties Of Porous Silicon

Porous Silicon Fabrication and Surface Cracking Behavior Research Based on Anodic Electrochemical Etching▴

Morphological and Electrical Features of Porous Silicon Prepared by Metal-Induced Chemical Etching

Emission Properties of Porous Silicon Electron Emitters Formed by Pulsed Anodic Etching

The Influence of Microstructure on Optical Properties of Porous Silicon

Study on Fabrication and Thermal Analysis of Porous Silicon Nanoenergetic Materials

Influence of Polarized Bias and Porous Silicon Morphology on the Electrical Behavior of Au-porous Silicon Contacts

Effect of post-treatment processes on the photoluminescence of porous silicon

Morphological Aspects of Porous Silicon Prepared by Photoelectrochemical Etching

Fabrication, characterization, and application in nanoenergetic materials of uncracked nano porous silicon thick films

Preparation and Characterization of Freestanding Porous Silicon Films with High Porosities

The Mechanism of the Electrochemical Oxidation in the Constant Current Mode of the Porous Silicon

Improved Metal-Semiconductor Contacts on Porous Silicon by Electroless Nickel Plating