Abstract:Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a> and 0.02 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>) in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times (5 to 25 min). The irradiation has been achieved using laser beam of 2W power and 810 nm wavelength. We have studied the morphological and structural properties of PSi layers using the techniques of Xray Diffraction (XRD) and Scanning Electron Microscopy (SEM) and Gravimetric method. The Xray Diffraction data shows that the structure aspect of PSi layers remains crystalline as well as the decreasing of diffraction angle (thetaB) of Xray from PSi layers (29 to 26 degree) and increasing of the lattice parameter values of PSi structures with increasing of etching times from 5 to 25 min., and the resistivity of silicon substrates from 0.02 to 3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>. The nanocrystallite size is decreasing from (20.72 to 5.13 nm) with increasing of etching times, and the resistivity of silicon substrates. The SEM images shows that the values of pore width and PSi layer thickness increases from (0.5 to 6.25 micrometer) and (6.7 to 47 micrometer) respectively with increasing of etching times and silicon substrates resistivities, while the values of the thickness of walls between pores has been varied from (1.25 to 0.03 micrometer) with increasing of etching times and silicon substrates resistivities. The pore shape of pores has been varied from Cylindrical to Rectangular and to Starful with varied of etching conditions. Further the measured specific surface area of PSi layers has been increased from (7.43 to 235.35 m2/cm3) with increasing of etching times and silicon substrates resistivities.

Long-time Stability of the Enhanced Porous Silicon Opto-electrical Properties by Samarium Pore-filling

Effect of post-treatment processes on the photoluminescence of porous silicon

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

The Influence of Microstructure on Optical Properties of Porous Silicon

Al-assisted Anodic Etched Porous Silicon

Relationship Between Minority Carrier Life and Morphology with Luminescent Properties in Porous Silicon

Study of Optical Properties of Porous Silicon Produced by Metal-Aid

Characterization of Stain Etched Porous Si with Photoluminescence, Electron-Paramagnetic-Resonance, and Infrared-Absorption Spectroscopy

Study of Photoconductivity and Photoluminescence of Organic/porous Silicon Complexes

XPS Study of Porous Silicon

Novel simple and effective past-treatment technique of porous silicon

Optical Absorption and Photoluminescence Studies of Free-Standing Porous Silicon Films with High Porosities

Research on Photoluminescence Properties of Porous Silicon Coated with a PMMA Polymer Film

The Temperature Effect on the Photoluminescence of Porous Silicon Films Obtained from an N-Type Silicon Substrate

Preparation and Characterization of Freestanding Porous Silicon Films with High Porosities

Structural, Morphological and Electrical Properties of Porous Silicon Prepared Under Laser Illumination

Studies on microstructure and photoluminescence property of porous silicon

Thermophysical Characteristics of the Porous Silicon Samples Formed by Electrochemical, Chemical and Combined Etching Methods

A Blue Shift Followed by a Red Shift of the Photoluminescence Spectra for Porous Silicon Treated Alternatively by Chemical Etching and Laser Illumination

Photoluminescence of oxidized porous silicon under UV-light illumination

Effects of O, H and N passivation on photoluminescence from porous silicon