Abstract:Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a> and 0.02 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>) in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times (5 to 25 min). The irradiation has been achieved using laser beam of 2W power and 810 nm wavelength. We have studied the morphological and structural properties of PSi layers using the techniques of Xray Diffraction (XRD) and Scanning Electron Microscopy (SEM) and Gravimetric method. The Xray Diffraction data shows that the structure aspect of PSi layers remains crystalline as well as the decreasing of diffraction angle (thetaB) of Xray from PSi layers (29 to 26 degree) and increasing of the lattice parameter values of PSi structures with increasing of etching times from 5 to 25 min., and the resistivity of silicon substrates from 0.02 to 3.5 <a class="link-external link-http" href="http://ohm.cm" rel="external noopener nofollow">this http URL</a>. The nanocrystallite size is decreasing from (20.72 to 5.13 nm) with increasing of etching times, and the resistivity of silicon substrates. The SEM images shows that the values of pore width and PSi layer thickness increases from (0.5 to 6.25 micrometer) and (6.7 to 47 micrometer) respectively with increasing of etching times and silicon substrates resistivities, while the values of the thickness of walls between pores has been varied from (1.25 to 0.03 micrometer) with increasing of etching times and silicon substrates resistivities. The pore shape of pores has been varied from Cylindrical to Rectangular and to Starful with varied of etching conditions. Further the measured specific surface area of PSi layers has been increased from (7.43 to 235.35 m2/cm3) with increasing of etching times and silicon substrates resistivities.

Preparation Of Porous Silicon By Electrochemical Etching Methods And Its Morphological And Optical Properties

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Al-assisted Anodic Etched Porous Silicon

Study of Optical Properties of Porous Silicon Produced by Metal-Aid

Porous Silicon Fabrication and Surface Cracking Behavior Research Based on Anodic Electrochemical Etching▴

The Influence of Microstructure on Optical Properties of Porous Silicon

Morphological Aspects of Porous Silicon Prepared by Photoelectrochemical Etching

Structural, Morphological and Electrical Properties of Porous Silicon Prepared Under Laser Illumination

Morphological and Electrical Features of Porous Silicon Prepared by Metal-Induced Chemical Etching

Facile Preparation of Porous Silicon from Silver-Assisted Chemical Etching Method on Silicon

Photoluminescence, Composition and Microstructure of Porous Silicon Prepared by Different Substrates

Electrophoretic Assembly of Porous Silicon

Microstructures and Emission Characteristics of Porous Silicon Films

Preparation and Characterization of Freestanding Porous Silicon Films with High Porosities

Fabrication and Characterization of Porous Silicon Using Chemical Etching Method

Preparation Of Porous Silicon Using Anodizing And Suppercritical Drying

Material synthesis: Microstructure and light emitting in porous silicon derived from hydrothermal etching

Structure and surface control of porous silicon for sensor applications

Studies on microstructure and photoluminescence property of porous silicon

Modification of Surface Morphology and Optoelectronic Response in Porous Si Films by Electrochemical Methods

Effect of Etching Time on Porous Silicon Formation