Abstract:<p>A multiple principal elements CuAl10Fe5Ni5Mn1.2 alloy is widely used in the bearing bracket of high speed railway, nuclear power and marine engineering. In traditional metal materials, the evolution of strength and elongation are mutually inconsistent. The multiple principal elements CuAl10Fe5Ni5Mn1.2(wt%) alloy shows the simultaneous improvement of strength and toughness. The present work has systematically studied the strengthening and plasticity behaviors of CuAl10Fe5Ni5Mn1.2(wt%) alloy under complex stirring. The mechanisms responsible for both increasing its strength and plasticity were clarified. It is found that the properties of novel Al10Fe5Ni5Mn1.2 (wt%) alloy are better than other aluminum bronze alloys. Its Rm is 729 MPa, A<sub>5.65</sub> is 16% and yield strength (Rp0.2) is 382 MPa. K phases with nano structures distribute in the grains boundaries complete boundaries strengthening. Schmid factor for the basal slip system is from 0.3 to 0.5, which could largely contribute to grain boundary migration and grain rotation. Twinning deformation is initiated and it can open the low angle grain boundaries (LAGBs) and media angle grain boundaries (MAGBs), so the proper combination of strain hardening and plastic deformation enables CuAl10Fe5Ni5Mn1.2 wt% to undergo uniform deformation with micro-nano structures, result in increasing the toughness. The solid solution forms atom scale strengthening. Nano-structures and micron K phase form nano-micro scale strengthening, respectively. Multi-scales strengthening and twinning deformation opening the LAGBs and MAGBs, resulting in increasing both strength and plasticity on the novel CuAl10Fe5Ni5Mn1.2 wt% alloy.</p>

Boosted mechanical properties of sintered MoLa alloys with ultrafine-grains by the nanostructuring of secondary phase

Nano Mo–La–O particles strengthened Mo alloys fabricated via freeze-drying technology and low temperature sintering

Effects of shape and size of second phase on mechanical properties of sintered Mo-Y2O3 alloys

Secondary phases effects on microstructure and mechanical properties of lanthanum-doped titanium‐zirconium‐molybdenum alloy

Microstructure and compression properties of fine Al2O3 particles dispersion strengthened molybdenum alloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Unexpected strengthening of the Mo-containing low-density steel achieved through a novel nano-ordered phase

Unveiling the Precipitation Behavior and Mechanical Properties in G-phase Strengthened CrFe2Ni2Ti0.2Six Multi-Principal Element Alloys

In-situ oxide dispersion strengthened ultrafine-grained molybdenum alloy with enhanced hardness and bending strength

Microstructure and High-Temperature Mechanical Properties of Second-Phase Enhanced Mo-La2O3-ZrC Alloys Post-Treated by Cross Rolling

Doping N/O Impurities into a MoNbTiWZr Refractory Multi-Principal Element Alloy and the Strengthening Mechanism

The investigation on microstructure evolution and mechanical behavior of extruded Mg-1.5Al-xLa-Mn (x=0.5, 1, 2wt%) alloys

Mechanical behaviors of novel multiple principal elements CuAl10Fe5Ni5Mn1.2 wt% with micro-nano structures

Development and Characterization of a Novel Fine-Grained W–Ni–Mn–Mo Alloys with La2O3 Addition Prepared Via Low-Temperature Sintering

Optimizing the microstructure and mechanical behaviors of bimodal Mo-Si-B alloy by heat treatment

Bulk nanostructured Al-Si alloy with remarkable improvement in strength and ductility

Preparation of nanostructural oxide dispersion strengthened (ODS) Mo alloy by mechanical alloying and spark plasma sintering, and its characterization

Synergetic effects of complex additions of Mo and Ni on the phase transformation behavior and mechanical properties of austenitic lightweight steels

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Effects of La on microstructure and mechanical properties of NbMoTiVSi0.2 refractory high entropy alloys

Effect of rare earth oxide doping on microstructure and mechanical property of Mo-30 W solid solution alloy