Abstract:High strength-elongation synergy and its dependence on microstructure are the eternal themes of metallic materials including Ti alloys. In this study, the relationship between the microstructure evolution and mechanical properties of the Ti-25Zr-4Al-1.5Mn (TZAM, wt. %) near-α Ti alloy was systematically investigated after hot rolling at temperatures ranging in the whole solid solution region. The content of primary α phase decreased gradually with the increasing of rolling temperature. An excellent comprehensive mechanical properties with a yield strength of 1055±10 MPa and a total elongation of 23.6±0.6% were obtained for the specimen after rolling at 750 °C (single α phase temperature region). This great strength-elongation synergy is mainly due to the synthetic action of substructure strengthening, dislocation strengthening, basal random heterogeneity (BRH) texture, and suitable content of β phase. The α" martensitic phase was formed after rolling at temperatures of 800 and 850 °C (α + β two-phase temperature region), resulting in a significant decrease in yield strength. However, remarkable work hardening with a rate of approximately 10 GPa occurred in both specimens. The whole evolution process of primary α grains, namely dynamic recovery and recrystallization during hot-rolled is deeply discussed. When the rolling temperature increased to 900 °C (single β phase temperature region), the dominated acicular α´ martensitic phase with high dislocation density resulted in an ultra-high strength (1264±12 and 1488±11 MPa for yield and tensile strength respectively) at the expense of plasticity. These findings revealed the microstructure evolution and its relationship to the mechanical properties of a TiZr-based alloy after the thermomechanical processing and helped to understand deeply the theory of metallic strengthening and elongation.

Secondary phases effects on microstructure and mechanical properties of lanthanum-doped titanium‐zirconium‐molybdenum alloy

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Secondary phases formation in lanthanum-doped titanium-zirconium-molybdenum alloy

Secondary phases strengthening-toughening effects in the Mo–TiC–La2O3 alloys

Strengthening and Elongation Mechanism of Lanthanum-doped Titanium-Zirconium-Molybdenum Alloy

Effect of secondary phases on the strength and elongation of a novel Mo-TiC-ZrC-C alloy

Electrochemical Behavior and Microstructural Characterization of Lanthanum-Doped Titanium-Zirconium-molybdenum Alloy

La2O3 Effects on TZM Alloy Recovery, Recrystallization and Mechanical Properties

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Micro-nano Secondary Phase Greatly Increases the Plasticity of Titanium-Zirconium-molybdenum Alloy

Preparation and ductile-to-brittle transition temperature of the La-TZM alloy plates

ZrTiO4 secondary phase effects on ductility and toughness of molybdenum alloys

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Effect Of La, Zr Micro-Alloying On The Microstructure And Mechanical Properties Of Al-5mg-0.2ti Alloy

Effect of Zr, Hf, and Sn Additives on Elastic Properties of Α2-Ti3al Phase by First-Principles Calculations

Effect of Lanthanum Doping Method on Properties of La-TZM Alloy

Boosted mechanical properties of sintered MoLa alloys with ultrafine-grains by the nanostructuring of secondary phase

Fracture behavior of the La-doped molybdenum-titanium-zirconium alloy

Microstructure of La-TZM alloy doped with rare-earth oxide La 2O 3

The Effect of Secondary Phase on Corrosion Behaviors of the Titanium–zirconium–molybdenum Alloy

Effect of microalloying with rare-earth lanthanum on dynamic recrystallization behavior and mechanical properties of Ti sheets