Abstract:The Silicon carbide (SiC) is the second hardest material for single crystalline materials, which is only softer than the diamond, and recognized as a super hard wide-bandgap semiconductor material. The cutting process of SiC is mainly done by the abrasives in diamond, which leads to low cutting efficiency, high loss of abrasives, and server cutting damage. Thermal Laser Separation (TLS) uses the thermal effect of laser irradiation to cause the uneven expansion of materials, and cause the dynamic tensile and compressive stress fields to control the crack expansion, and realize the material separation. TLS consists two steps, firstly pulsed laser or mechanical blade are adopted to form a starting point for the crack; secondly continuous wave laser is moving along the prefabricated trace to separation the wafer by guiding the crack propagation. The separation process is a controlled crack propagation process in brittle materials from the view of fracture mechanics. But there is still not enough understanding of the fracture mechanism and parameter optimization problem of SiC dicing with TLS.In this paper, to understand the separation process, we have established a finite element model with a prefabricated crack in ABAQUS. In the simulation operation, different powers are set from 8W to 15W. We obtained the temperature distribution law of SiC surface under different laser heat source parameters. The stress intensity factor of SiC prefabricated cracks under the action of laser heat sources was sorted out. The results demonstrate that the SiC fracture mode is type I fracture. By studying the law of the stress field distribution on the SiC surface and along the depth direction, We further understand the separation mechanism of 4H-SiC dicing by continuous laser.

Semiconductor laser asymmetry cutting glass with laser induced thermal-crack propagation

Laser cutting sandwich structure glass–silicon–glass wafer with laser induced thermal–crack propagation

Low-Temperature Gas Cooling Correction Trajectory Offset Technology of Laser-Induced Thermal Crack Propagation for Asymmetric Linear Cutting Glass

Effect of thermal stresses on chip-free diode laser cutting of glass

A Study of Inner Crack Testing with the Laser Phased Array Method.

Tensile strength and crack tip stress distribution of modified glass in the composite laser beam separation

The separation mechanism of 4H-SiC dicing by continuous laser

Damage morphology and mechanism in ablation cutting of thin glass sheets with picosecond pulsed lasers

Thermal stress analysis on laser scribing of glass

Three-dimensional thermal stress analysis on laser scribing of glass

Crack-Free Laser Processing Of Glass Substrate And Its Mechanisms

Crack growth analysis of ultraviolet nanosecond laser scanning glass with acoustic emission

High quality full ablation cutting and stealth dicing of silica glass using picosecond laser Bessel beam with burst mode

Crack arrest and stress dependence of laser-induced surface damage in fused-silica and borosilicate glass

Thick Glass High-Quality Cutting by Ultrafast Laser Bessel Beam Perforation-Assisted Separation

Crack suppression of glass welding by ultrafast laser without optical contact based on light modulation

Analysis of laser metal-cut energy process window

Mechanically inspired laser scribing of thin flexible glass

Energy-dependent correlation between micro/nano-morphology and stress state of femtosecond laser-induced modification in fused silica

Research on the formation and evolution mechanism of cracks in laser stealth dicing of silicon carbide crystals

YAG laser cutting soda-lime glass with controlled fracture and volumetric heat absorption