Abstract:This study reports the investigation of the morphology of the surface damaged during the laser scribing of glass and the analysis of the corresponding interaction mechanism between the laser and glass. In this study, the soda lime glass of 1.1 mm thick is scribed by an ultraviolet (UV) picosecond laser (Nd:YVO4) by varying laser power, scan speed and number of scans. From the analysis of experimental results, it is found that the surface morphology can be classified as three groups such as swelled surface, wave pattern (either shallow or deep) and groove depending on the accumulated laser energy per unit beam spot. The accumulation of the large laser energy (12–30 × 10−4 J) into the material induces volume meting and local vaporization below the surface without material removal, which makes bubbles inside glass volume and swelled surface through volume expansion. With the decrease of the energy accumulation (4.2–9 × 10−4 J), the surface morphology is changed into shallow wave pattern by slight material removal. With further decrease of the laser energy accumulation (1.4–3 × 10−4 J), either deep wave or groove morphology is obtained due to the increase of the material removal. Under very low laser energy accumulation region (0.3–1.05 × 10−4 J), the groove shape is only formed. In particular, the groove morphology without cracking is successfully produced within the range of 0.3–0.5 × 10−4 J. The threshold laser energy accumulation for surface damage is found to be around 0.25–0.3 × 10−4 J. Below this energy accumulation, modification in the surface morphology doesn’t occur. It is also found that the groove morphology is hard to obtain by even multiple laser scans if it is not well formed by single laser scan. The cracks produced during the scribing process can be characterized with several propagation morphologies. At the region of the relatively low laser energy accumulation, cracks propagating across the scan direction are only generated. However, cracks propagating both across and along the scan direction are found with the increase of the laser energy accumulation. Huge cracks (arc or sinusoidal curve shape) of several millimeters in size are produced under the very large laser energy accumulation.

Crack-Free Laser Processing Of Glass Substrate And Its Mechanisms

Laser-Induced-Plasma-Assisted Ablation for Glass Microfabrication

Laser-induced-plasma assisted ablation and its applications

Crack suppression of glass welding by ultrafast laser without optical contact based on light modulation

Laser-induced plasma-assisted ablation (LIPAA) of glass: Effects of the laser fluence on plasma parameters and crater morphology

Hybrid Laser Processing for Microfabrication of Glass

Fabrication of optical glass lenses using laser slicing technology (Stress formation and crack propagation mechanism in internal laser processing)

Study on High-Efficiency Separation of Laminated Glass by Skillfully Combining Laser-Induced Thermal-Crack Propagation and Laser Thermal Melting

Dual Laser Beam Revising the Separation Path Technology of Laser Induced Thermal-Crack Propagation for Asymmetric Linear Cutting Glass

Low Resistivity Glass Metallization by Laser Induced Plasma Assisted Ablation (Lipaa)

Cutting The Closed Curve Shape Inside Glass With Laser Induced Thermal-Crack Propagation

Thermal stress analysis on laser scribing of glass

A New Method for Processing Ceramics with Cracked Glaze

Crack growth analysis of ultraviolet nanosecond laser scanning glass with acoustic emission

Investigation of the surface morphology in glass scribing with a UV picosecond laser

The interaction of femtosecond and nanosecond laser pulses with the surface of glass

Crack-free Femtosecond Laser Processing of Lithium Niobate Benefited by High Substrate Temperature

Laser cutting sandwich structure glass–silicon–glass wafer with laser induced thermal–crack propagation

Effect of Focus Position and Shear Stresses on the Crack Sectional Shape in Semiconductor Laser Linear Cutting Glass

Direct Femtosecond Laser Nanopatterning of Glass Substrate by Particle-Assisted Near-Field Enhancement

Theoretical And Experimental Demonstration Of Transparent Glass Laser Processing With A Tripartite-Interaction Procedure