Abstract:The influence of scan speed and fluence on the formation of micro/nano-structures were explored under 800 nm, 35 femtosecond (fs) laser irradiation. Surface morphology, roughness, and laser-induced defects of prepared samples were characterized. The antireflection property and wettability of laser treated samples were also tested and compared with that of original fused silica. Results showed that the laser irradiated structures included melt zone, nanofibers, laser-induced periodic surface structures (LIPSS), and fluffy structures. At a fix scan speed, high-spatial-frequency LIPSS (HFSL) were observed in the low fluence region. A transition from HSFL to LSFL (low-spatial-frequency LIPSS) occurs when a critical fluence threshold is exceeded. Otherwise, the scan speed significantly influences the surface roughness and should be controlled carefully during the preparation process. The material structural modification in laser-irradiated fused silica surface was verified by the Raman spectra. The concentration of oxygen deficient centers (ODCs), and non-bridging oxygen hole centers (NBOHCs) increased after femtosecond laser irradiation by analyzing the photoluminescence. The laser irradiated surface has a better antireflection property in comparison with that of original fused silica, which may be due to the scattering and absorption of micro/nano structures. After laser treatment, the micro/nano structured fused silica presented super-hydrophilic property. The contact angle of water droplet decreases can be explained by Wenzel's model.

Energy-dependent correlation between micro/nano-morphology and stress state of femtosecond laser-induced modification in fused silica

Laser-induced stress by multi-beam femtosecond pulses in fused silica

Microstructures Induced by Femtosecond Laser Pulses Inside Glasses

Stress in femtosecond-laser-written waveguides in fused silica

Polarization-dependent Microstructural Evolution Induced by a Femtosecond Laser in an Aluminosilicate Glass

Study of the Effects of Stress Wave Behavior in Laser-Induced Exit-Surface Damage of Fused Silica Using Time-Resolved Multi-Polariscopic Imaging

Residual Stress Near Cracks of K9 and Fused Silica under 1064 Nm Nanosecond Laser Irradiation

Bulk Damage and Stress Behavior of Fused Silica Irradiated by Nanosecond Laser

Stress induced birefringence tuning in femtosecond laser fabricated waveguides in fused silica.

Theoretical and experimental investigations in thermo-mechanical properties of fused silica with pulsed CO2 laser ablation

High-fluence femtosecond laser ablation of silica glass: Effects of laser-induced pressure

Characterization of Morphology and Mechanical Properties of Glass Interior Irradiated by Femtosecond Laser

Stress Waves Induced by Femtosecond Laser Pulse Ablating Silica Glass

Space-Selective Modification of Glass by Using Femtosecond Laser

Scan Speed and Fluence Effects in Femtosecond Laser Induced Micro/nano-Structures on the Surface of Fused Silica

Generation of Multiple Stress Waves in Silica Glass in High Fluence Femtosecond Laser Ablation

Space-selective Microscopic Modifications of Glass Structure by a Femtosecond Laser

Residual Strain Measurement of Femtosecond Laser Microexploded Glass by Nanoindentation

On the anisotropy of stress-distribution induced in glasses and crystals by non-ablative femtosecond laser exposure

Femtosecond laser-induced microstructures in glasses and applications in micro-optics.

Effect of residual stress on laser-induced damage characterization of mitigated damage sites in fused silica