Abstract:New process to compose a reacted Nb3Sn superconducting cable with aluminum-alloys has been developed by using friction stir welding (FSW) technique. The FSW joining process, which takes place in the solid phase below the melting point of the materials, has considerable advantages such as a high strength of welding zone and much lower distortion due to both small heat affects and reliable control of joining depth as compared with conventional welding method. In order to realize practical aluminum-alloy jacketed Nb3Sn superconductors, we have carried out elemental researches by using FSW technique. For a fabrication of aluminum-alloy jacketed Nb3Sn superconductor of a dimension 17 mmw × 4.9 mmt a Rutherford type superconducting cable having 18 reacted Nb3Sn strands of diameter 1.0 mm was assembled into a set of channel and fitting-cover made of aluminum-alloy A6061-T6 with filling material indium. Then, their joining parts were connected by using the FSW technique. The measurement on critical current (Ic) of the fabricated Nb3Sn superconductor achieved over 9.5 kA at 8 T, 4.26 K even after bending with a radius of 150 mm in a flatwise direction, which showed no degradation in comparison with Ic values multiplied by number of strands in the cable. As the results, we succeeded in developing novel type of aluminum-alloy jacketed Nb3Sn superconductors manufactured by FSW technique, which have large current capacity, sufficient allowable bending strains for a coil winding and improved contact between a cable and an aluminum-alloy jacket. The developed superconductors will be applicable to react-and-wind superconducting magnets having very large current at high magnetic field such as nuclear fusion reactors and detectors for high energy physics of the next generation.

Research on Insulation Technology for Nb3Sn Layer Coil of Superconducting Conductor Testing Facility

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF

Investigation of real-time strain responses of the insulating system of superconducting magnets by using fiber Bragg grating sensors

Development Of Insulation Technology With Vacuum-Pressure-Impregnation (Vpi) For Iter Correction Coil

Synergic realization of electrical insulation and mechanical strength in liquid nitrogen for high-temperature superconducting tapes with ultra-thin acrylic resin coating

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Development of Electromagnetic Forming Nbti Superconducting Joint

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Numerical Study on Thermal Stability of No-Insulation Coils Using a Three-Dimensional Finite-Element Model

The Research on No-Insulation ReBCO Racetrack Coil

R&D on glass fiber reinforced epoxy resin composites for superconducting Tokamak

Characterization of insulating coatings for wind-and-react coil fabrication

Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb 3 Sn Demonstrator under High Magnetic Field

Thermal Conductivity of Industrial Nb3Sn Wires Fabricated by Various Techniques

Performance of Titanium-Oxide/Polymer Insulation in Bi-2212/Ag-alloy Round Wire Wound Superconducting Coils

Quench Analysis and Improvement of a Semi-Open Split NbTi Superconducting Magnet With Large Inductance

Impact of local plastic deformation on thermo-magnetic instability of high-J c Nb 3 Sn strand

Novel Type of Aluminum-Alloy Jacketed ${\rm Nb}_{3}{\rm Sn}$ Superconductors Manufactured by Friction Stir Welding Technique

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Fabrication and Characterization of Ni-clad Bi-2223/Ag Superconducting Tapes

Continuous Wave Mode Test of Conduction-Cooled Nb3Sn Radio Frequency Superconducting Cavities at Peking University