Study on the NbTi/Cu30Ni Superconducting Switch Wire Recently in WST
Qiang Guo,Zijing Zhou,Ruilong Wang,Kailin Zhang,Yanmin Zhu,Yigong Shi,Guo Yan,Xianghong Liu,Yong Feng,Jianfeng Li,Pingxiang Zhang
DOI: https://doi.org/10.1109/tasc.2022.3146096
IF: 1.9489
2022-06-01
IEEE Transactions on Applied Superconductivity
Abstract:The superconducting switch wire is a key component in the superconducting magnet. If the superconducting magnet quenches during the operation, the switch will disconnect automatically and avoid the magnet to be damaged. The Cu-30 wt. Ni alloy was used as matrix to manufacture superconducting switch wires because of its high resistance characteristic. However, because of its high hardness and work hardening characteristics, the risk of wire breakage occurred easily in the cold drawing process. Therefore, the way to solve this problem is one of the difficulties in the preparation of the superconducting switch wire. NbTiCu30Ni superconducting switch wires with filaments number of 55 were designed and fabricated by double stacking method, hot extrusion, cold drawing and heat treatment. Then, the NbTiCu30Ni superconducting switch wires with the diameter of 0.500 mm, the Cu30NiSC of 1.1, and the maximum length of 40.68 km were obtained. Finally, the six insulated NbTiCu30Ni wires and one insulated Cu core wire were cabled to the final cable with the diameter of 1.700 mm and the twist pitch of 36 mm. WST has already achieved mass production of NbTiCu30Ni superconducting switch wire. The Ic at 5 T & 4.2 K of the wire is 280.7 A and the line resistance is 2352 mm. At present, the Western Superconducting Technologies Co., Ltd (WST) superconducting switch wires and cables have been successfully delivered to many different Chinese superconducting magnet manufactures and received good reviews and feedback.
physics, applied,engineering, electrical & electronic