Abstract:A novel design for providing a high field based on a semi-open split Nb-Ti superconducting magnet has been developed. It is to incorporate in the versatile multi-field test facility established for professional tests of field-dependent and mechanical behaviors of low-temperature and high-temperature superconducting wires and tapes. The semi-open split superconducting magnet (the peak magnetic field in the coil up to 7.8 T) is a good candidate to generate a transverse field in a large work region of Ø100 mm × H800 mm. On the other hand, its semi-open shaped configuration for samples makes it feasible for a non-contact optical technology of digital image correlation (DIC) for being utilized in full-field deformation measurements under extreme conditions. Since the irregular-shaped configuration and large deformation due to attraction; mechanical behavior of support structures of the magnet will be crucial for its stability and operation function. In this study, an internal reinforced cantilever structure for splitting the superconducting magnet poles was proposed to bear the large attraction from Lorentz forces and keep a stable configuration under operation conditions. Analysis based on a finite element method was performed to obtain deformation and stress profiles of the superconducting coil windings and reinforced cantilever structure with contact nonlinearity. The effect of geometrical parameters of the cantilever on axial displacements in the split magnet system was addressed. Experiments on excitation and quench of the assembled split superconducting magnet were performed at 4.2 K to capture strain responses. The numerical predictions showed reasonable agreements with the observations on structural stress/strain states. It indicated that an optimization analysis of the cantilever structure is necessary for a high-field irregular-shaped magnet system for its assembly and excitation.

A Combined Testing and Modelling Methodology for the Mechanics of High-Field Superconducting Magnets

Analytical and Numerical Methods to Estimate the Effective Mechanical Properties of Rutherford Cables

Geometrical Modeling And Mechanical Behavior Analysis Of Nb3sn Rutherford Cable

Determination of the electromechanical limits of high-performance Nb$_3$Sn Rutherford cables under transverse stress from a single-wire experiment

Study on internal strain distribution of the high-field Nb3Sn superconducting accelerator magnets with homogenization theory

Modeling of the Stacked High-Temperature Superconducting Cable-in-Conduit Conductor for High-Field Magnet Applications

Efficient multiscale investigation of mechanical behavior in Nb3Sn superconducting accelerator magnet based on self-consistent clustering analysis

Design and analysis of a HTS internally cooled cable for the Muon Collider target and capture solenoid magnets

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Mechanical Behavior of a 16-T FCC Dipole Magnet During a Quench

A Coupled Electromagnetic-Mechanical Model and Contact Behavior of the Superconducting Coils

Mechanical Responses of a Semi-Open Split Nb–Ti Superconducting Magnet Reinforced with Cantilever Structure

Manufacturing and Testing of Accelerator Superconducting Magnets

Optimizing the use of pressurized bladders for the assembly of HL-LHC MQXFB magnets

Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF

Study on Performance Degradation of Multi-Layer Spiral Superconducting Cable Under Bending Load

Structural Design and Analysis of the Model Coil for the Hybrid Magnet Superconducting Outsert

Mechanical Design, Assembly and Strain Measurement Results of a 13-T Superconducting Dipole Magnet

Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb 3 Sn Demonstrator under High Magnetic Field

Physics-driven lumped-element modelling for impedance simulations of superconducting accelerator magnets

An Advanced Computational Approach for Evaluating Screening-Current-Induced Strain in REBCO HTS Coils Considering Electromagnetic-Mechanical Coupling