Abstract:High-temperature superconductor (HTS) coated conductors (CC) are often wound into pancake coils with electrical insulation in-between the turns. The copper terminals are used for current injection and conduction cooling. An inherent variation of the critical current along the CC length results from its manufacturing process. This variation causes non-uniform heat generation, particularly when the coil is operated at a high fraction of the nominal critical current or when large critical current defects are present. The temperature distribution resulting from the balance between cooling and heating, in combination with the magnetic field and critical current distributions, determines whether a thermal runaway occurs. Accurately predicting the level of critical current defects that can be tolerated during conduction-cooled operation is difficult and requires a 3D coupled electromagnetic and thermal simulation. This paper presents the results of simulations that are performed with the open-source Finite Element Quench Simulator (FiQuS) tool developed at CERN as part of the STEAM framework. The 3D coupled magnetodynamic-thermal simulations are based on the H-phi formulation and use thin shell approximations, a CC homogenization and conduction-cooling. The critical current (Ic) is varied along the CC length. The effect of a single defect specified as a reduction of Ic along the CC length is investigated in terms of the coil's ability to reach and maintain the operating conditions. The Ic and length of the defect that results in a thermal runaway are analyzed in terms of defect location. In addition, a classical 1D scenario with a quench heater is studied. Both the local defect and the heater cases are compared in terms of the voltage signal available for quench detection. These cases result in very different requirements for quench detection, and their implications are discussed.

Numerical Study on Thermal Stability of No-Insulation Coils Using a Three-Dimensional Finite-Element Model

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Three-dimensional simulation of the coupled electromagnetic-mechanical responses in a no-insulation racetrack coil

Holistic numerical simulation of a quenching process on a real-size multifilamentary superconducting coil

Experiment and Numerical Modeling of Current Distributions Inside REBCO Tapes of No-Insulation Superconducting Magnet Coils Under Time-Varying Fields

Electromagnetic-thermal-mechanical behaviors of a no-insulation double-pancake coil induced by a quench in the self field and the high field

Influence of Critical Current Distribution on Operation, Quench Detection and Protection of HTS Pancake Coils

Magnetization loss of no-insulation coil for an electrodynamic suspension system

Study of contact resistivity of a no-insulation superconducting coil

Study on demagnetization behaviour of no-insulation (NI) persistent-current mode (PCM) HTS coil under external AC fields by 3D FEM simulation

Numerical study on the transport current distribution in the multi-layer CORC coil

An Open-Source 3D FE Quench Simulation Tool for No-Insulation HTS Pancake Coils

The Research on No-Insulation ReBCO Racetrack Coil

Numerical analysis of non-insulated DEMO TF coils

No-Insulation High-Temperature Superconductor Winding Technique for Electrical Aircraft Propulsion

Numerical Evaluation on Mechanical Behavior of No-Insulation REBCO Pancake Coils in Small-Scale Model of Skeleton Cyclotron

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Influence of Current Diffusion in Superconducting Magnet Fabricated by High Stabilizer Aluminum on Quench Propagation

Research on Insulation Technology for Nb3Sn Layer Coil of Superconducting Conductor Testing Facility