Abstract:The no-insulation (NI) winding technique is promising to be applied in the persistent-current mode (PCM) operation of high-temperature superconducting (HTS) coils to provide those advantages. To apply the NI PCM coil, its demagnetization behaviour (i.e., decay of persistent DC current) by external AC field, which occurs in maglev trains, electric machines, and other dynamic magnet systems, is essential to be understood. For this purpose, a 3D FEM model, capturing the full electromagnetic properties of NI HTS coils, is established. This work has studied three kinds of AC fields, observing the impact of turn-to-turn contact resistivity on demagnetization rates, which is attributed to current distribution modulations. Under transverse AC field, the lower contact resistivity attracts more transport current to flow in the radial pathway to bypass the 'dynamic resistance' generated in the superconductor, leading to slower demagnetization. Under axial AC field, the demagnetization rate exhibits a non-monotonic relation with the contact resistivity: (1) the initial decrease of contact resistivity leads to concentration of induced AC current on the outer turns, which accelerates the demagnetization; (2) the further decrease of contact resistivity makes the current smartly redistribute to avoid to flow through the loss-concentrated outer turns, thus slowing down the demagnetization. Under the rotating DC field, a hybrid of the transverse and axial fields, the impact of contact resistivity on the demagnetization rate exhibits combined characteristics of the transverse and axial components. Besides, quantitative prediction on the demagnetization rate of NI PCM coil under external AC field is instructive for practical designs and operations, which is tried by this 3D FEM model, and a comparison with experimental result is conducted.

Study on demagnetization behaviour of no-insulation (NI) persistent-current mode (PCM) HTS coil under external AC fields by 3D FEM simulation

Numerical Study on AC Loss of HTS Coil with DC Transport Current under External AC Magnetic Field

The Field Decay Characteristic for a Closed HTS No-Insulation Coil with Partial Tape Exposed to an AC Magnetic Field

Study of Induced Current in Closed HTS Magnets under AC Fields: Simulation and Experiment

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Influence of Dimensional Parameters on Three-Phase Short Circuit and Demagnetization in Surface-Mounted PM Machines

Behaviour Prediction of Closed-loop HTS coils in Non-Uniform AC fields

Magnetization loss of no-insulation coil for an electrodynamic suspension system

Feasibility Analysis of Partially Insulated Nb3Sn EU DEMO Toroidal Field Coil

Three-dimensional simulation of the coupled electromagnetic-mechanical responses in a no-insulation racetrack coil

Numerical Analysis of the Contact Resistance in a No-Insulation Layer-Wound Coil with a Simplified Electromagnetic–mechanical Model

Numerical Study on Thermal Stability of No-Insulation Coils Using a Three-Dimensional Finite-Element Model

Experiment and Numerical Modeling of Current Distributions Inside REBCO Tapes of No-Insulation Superconducting Magnet Coils Under Time-Varying Fields

Investigation of the Effect of Difference in the Characteristic Resistance of Dp Coils on the Field and Losses of Mi Hts Magnets

Transient Electromagnetic and Mechanical Analysis of No-Insulation Insert Coil Based on 2-D Method

Thermal Stability and Mechanical Behavior in No-Insulation High-Temperature Superconducting Pancake Coils

Performance and Analysis of No-Insulation HTS Toroidal Magnet

Failure Analysis on Nd-Fe-B under the Multi-Physical Field Coupling of Permanent-Magnet Synchronous Machines

Effect of Charging Sequence of Background Coil and Insert Coil on Screening Current in High-Field Non-Insulated Hybrid Superconducting Magnets

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores

Analysis of Charging Characteristics of a 500 MHz HTS-LTS Series NMR Magnet with an Intra-Layer No-Insulation HTS Layer-Wound Coil Structure